Lanier GX3000 User Manual page 102

Troubleshooting
Load the tray with paper of the specified type, and then change the paper type setting for the tray on the control
panel. Alternately, press the [Form Feed] key, select a tray containing paper of the specified type, and then print.
To cancel the print job, press the [Job Reset] key.
See p.103 "Paper Size Mismatch/Paper Type Mismatch (Tray
Mismatch (Bypass
Maintenance in process...
The printer is cleaning or flushing its print head. Wait a moment.
Right Front Cover is open/Close Right Front Cover
The right front cover is open. Close the print cartridge cover.
See p.110 "Cover Open / Print Cartridge(s) Not
Remove Misfeed Tray 1
Paper has jammed in Tray 1. Clear the jam.
See p.82 "Removing Paper Jammed in the Paper Tray (Tray
Remove Misfeed Bypass
Paper has jammed in the bypass tray. Clear the jam.
See p.83 "Removing Paper Jammed in the Bypass Tray
Remove Misfeed Guide Board
Paper has jammed in the Guide Board. Clear the jam.
See p.87 "Removing Paper Jammed around the Guide
Remove Misfeed Top Cover
Paper has jammed under the top cover. Clear the jam.
See p.86 "Removing Paper Jammed under the Top
Remove Misfeed Duplex
Paper has jammed in the duplex unit. Clear the jam.
See p.89 "Removing Paper Jammed in the Duplex
Remove Misfeed Ouput
Paper has jammed in the output tray. Clear the jam.
See p.90 "Removing Paper Jammed in the Output
Close Duplex Unit Cover
The duplex unit cover is open. Close the duplex unit cover.
See p.108 "Cover
Reset Duplex Unit correctly/Reset Duplex Unit correctly
The duplex unit has not been installed correctly. Reset the duplex unit correctly.
See p.109 "Duplex Unit Not
If this does not eliminate the problem, contact your service representative.
Tray)".
Open".
Detected".
1)", p.105 "Paper Size Mismatch/Paper Type
Detected".
1)".
(optional)".
Board".
Cover".
Unit".
Tray".
99