Lanier GX3050 User Manual page 222

Monitoring and Configuring the Printer
If you set [SMTP Authentication] to [On], the printer will try logging on using only CRAM MD5. If you set
[SMTP Authentication] to [Off], the printer will try logging on using PLAIN and then LOGIN.
Functions
SMTP Authentication
SMTP Authentication Name
SMTP Authentication Password
SMTP Authentication Encryption
Specifying POP before SMTP
By specifying the SMTP authentication setting, you can send e-mails to destinations where the e-mail server
carries out SMTP authentication.
By using POP before SMTP, you can log on to an SMTP server supporting POP before SMTP.
You can specify whether to use POP before SMTP, and specify the POP server name, POP port number,
POP user name, and POP password.
If you set [POP Authentication Encryption] to [Auto], the printer will try logging on by APOP login, and then
in plain text.
If you set [POP Authentication Encryption] to [On], the printer will try logging on only by APOP login. If you
set [POP Authentication Encryption] to [Off], the printer will try logging on only in plain text.
In standby time following POP authentication (in milliseconds), you can specify how long the printer can
wait for logging on to the SMTP server after logging on to the POP server.
Functions
POP before SMTP
POP Server Name
POP Port Number
POP User Name
POP Password
POP Authentication Encryption
Wait Time after POP Authentica-
tion
Selectable value
Enable
Disable
191 characters max. (1-byte al-
phanumerics)
63 characters max. (1-byte al-
phanumerics)
Auto
On
Off
Selectable value
Enable
Disable
127 characters max. (1-byte al-
phanumerics)
1-65535 (1-byte numeric char-
acters)
127 characters max. (1-byte al-
phanumerics)
63 characters max. (1-byte al-
phanumerics)
Auto
On
Off
0-10000
Default
Disable
None
None (No Password)
Auto
Default
Disable
None
110
None
None (no password)
Auto
300
219