Canceling The Print Job; No Paper/Tray Not Detected (Bypass Tray) - Lanier GX3050 User Manual

Troubleshooting

Canceling the Print Job

Cancel the print job.
1. Press the [Job Reset] key.
2. Press the [#Enter] key.
3. Press the [#Enter] key.

No Paper/Tray Not Detected (Bypass Tray)

There is no paper in the bypass tray or the paper is not loaded properly. Do one of the following:
Load the tray.
Press the [#Enter] key.
To load the tray, see p.31 "Loading Paper".
105