General Information; Disassembly - Pioneer KEH-1940 Service Manual

KEH-1940,1960

7. GENERAL INFORMATION

7.1 DISASSEMBLY

- Remove the Case(not shown)
1. Remove the three screws.
2. Remove the Case.
- Remove the Cassette Mechanism Assy
(not shown)
1. Remove the four screws.
2.Disconnect the connector, and then remove the
Cassette Mechanism Assy.
- Remove the Panel Unit(Fig.1)
Disengage the stopper at two locations
indicated by arrow.
Remove the Panel Unit.
- Remove the Tuner Amp Unit(Fig.2)
Remove the two screws.
Remove the three screws.
Remove the screw.
Unbend the tabs at four locations indicated
by arrow until straight.
Remove the Tuner Amp Unit.
34
Panel Unit
Tuner Amp Unit
Cassette Mechanism Assy
Fig.1
Fig.2