Installing Mobile Phonetools - BVRP mobile PhoneTools User Manual

Installing mobile PhoneTools

To install mobile PhoneTools on your hard drive, insert the CD-ROM containing the
program in the appropriate drive. When installing mobile PhoneTools from the CD-
Rom, the installation process starts automatically.
Should the installation program not start, execute the following instructions:
1.Select the Run command from the Start menu (accessible from the task bar).
2.Select the drive that contains the CD or type D:SETUP (D: represents the CD-
Rom drive).
3.Click OK to run the file.
An installation wizard will guide you step-by-step through the installation process,
prompting for information where needed. During the installation process the
content of the CD-Rom is copied onto your hard drive and a program group is
created to hold the application icons for mobile PhoneTools.
After installation, the online registration wizard is automatically launched (see
Online registration, page 6). The registration is necessary to benefit from the
guarantee, the technical assistance, and free upgrades.
Depending on the operating system, when the installation process is completed,
the installation wizard asks you to restart your computer so that all system
changes take effect.
The mobile PhoneTools program group is then accessible from the Start menu
(from the task bar) and the following icon is automatically added to your desktop:
mobile
PhoneTools
Note: after installation when launching the application for the first time:
- if no modem has been selected, a popup window prompts you to choose a modem from a list or to
have your installed cellular modem automatically detected. If you select the Select modem option,
make certain that your cell phone is correctly connected to your computer and that it is turned on.
- if one modem is installed and correctly detected by the application, you do not need to intervene.
3