2-4. BELT (COUNTER), BELT (CAP) S, M901 (CAPSTAN/REEL MOTOR), HRP901 (REC/PB HEAD),
HE901 (ERASE HEAD)
8 HE901 (ERASE head)
7 screw (M1.4X4.5)
2-5. CASSETTE LID ASSY, LED BOARD
• Install the cassette lid assy with
the cassette-up spring as shown
in the figure so that it fits into the
holes on the casstte lid assy.
cassette lid assy
cassette-up spring
cabinet (front)
1 belt (counter)
5 two screws (M1.4X1.4)
5 cassette-up spring
4
6 cassette lid assy
2
2 belt (CAP) S
3 two screws (M1.4X1.4)
4 M901 (capstan/reel motor)
6 HRP901(REC/PB head)
3 projection
8 LED board
7 two screws (M1.4)
TCM-450DV
1 Remove solder on MAIN board
(three places)
MAIN board
5