Specifications - Yamaha UD-Stomp Service Manual

Hide thumbs Also See for UD-Stomp:
Table of Contents

Advertisement

SPECIFICATIONS

Digital Section
• 8-Band Delay (Delay Time: 696msec max per band)
• Delay Time, Loop Filter (High Cut, Low Cut), Feedback, Tap,
Pan, Level parameters can be set for each individual Effect
Band.
• Effect Bands can be connected in series or parallel
• Effect Bands can be grouped together
• Maximum delay time (8 bands grouped) is 5890msec
• The same number of delay outputs as the number of delays
used in the Group are available.
• Tap Tempo Function (Delay Time)
• Loop Sampling Function
• Individual Modulation Settings (Speed, Depth) for each Effect
Band are available.
• Two types of modulation waves can be set simultaneously
(Sine + Triangle/Saw Up/Saw Down).
• Modulation sync between bands is available.
MIDI Functions
Receive: Program Change (Program Change Table can be
created), Control Change, Bulk In
Transmit: Program Change, Control Change, Bulk Out, Merge
Out
Controller Switch
Top Panel
Push Switch x17
UP, DOWN, UTILITY, STORE, EFFECT BAND (1 - 8),
CONNECT, GROUP, SYNC, WAVE, FUNCTION
Knob x14
ASSIGNABLE CONTROL, TIME COARSE, TIME FINE,
LOW CUT FILTER, HIGH CUT FILTER, FEEDBACK,
DIRECT LEVEL/PAN, TAP, SPEED, DEPTH, PAN, LEVEL,
EFFECT LEVEL, OUTPUT
Footswitch x4
1, 2, 3, BANK
Rear Panel
STAND-BY ON/OFF, INPUT LOW/HIGH
Display
7 Segment LED (3 digit) x1
Push Switch LED x17
Foot Switch LED x4
Connections/Jacks
INPUT: Standard Monaural Phone Jack
OUTPUT L/MONO, R: Standard Monaural Phone Jack
PHONES: Standard Stereo Phone Jack
EXP. PEDAL: Standard Stereo Phone Jack
DIGITAL OUT: COAXIAL (Samplling Rate : 44.1 kHz)
MIDI IN, MIDI OUT: 5 pin DIN
A/D Converter
20 bit + 3 bit Floating
D/A Converter
20 bit
Sampling Frequency
44.1 kHz
Memory Allocations
Preset: 90
User: 90
Input Level/Impedance
(When using preamp bypass)
INPUT HIGH: -25dBm/1MΩ
INPUT LOW: -15dBm/1MΩ
Output Level/Impedance
OUTPUT L/MONO, R: 0dBm/1kΩ
PHONES: 0dBm/47Ω (47Ω load)
Power
Exclusive Power Adaptor (AC-10)
AC Output: AC12V, 1000mA
Power Consumption
15W
Dimensions (WxHxD)
280x70x184mm (11.0"x2.8"x7.2")
Weight
2.2kg (4lbs 14oz)
Accessories
Power Adaptor (AC-10)
Owner's Manual
UD-Stomp
3

Advertisement

Table of Contents
loading

Table of Contents