Related Manuals for Micro Air Corporation MX 1800
Summary of Contents for Micro Air Corporation MX 1800
-
Page 1: Air Cleaners
® AIR CLEANERS Model MX 1800 OWNER’S MANUAL CAUTION Read complete instructions before operating. Please file for future reference. - Page 2 The MX 1800 wrap around pre-filter (WAP) is an optional pre-filter that is used to increase filter capacity and extend the life of the primary filter. The NOTE: If hanging MX 1800 upside down is required, remove the four (4) ¼” WAP is shipped separately from the MX 1800, and therefore requires hex bolts from bottom of cabinet and relocate to top four corners.
-
Page 3: Operating Instructions
MX1800 Locate WAP next to MX 1800 and secure to cabinet using the ¼” removing the hole plug in the top of the unit for access to the adjustment hardware provided. screw. Turn the unit on and place a piece of cardboard over the intake, NOTE: ¼”... - Page 4 MX1800 MX 1800 SILENCER INSTALLATION INSTRUCTIONS CAUTION: THIS INSTALLATION CAN CAUSE EXPOSURE TO LIVE PARTS. DISCONNECT ELECTRICAL POWER TO UNIT BEFORE PROCEEDING WITH INSTALLATION. Installation: Unpack and inspect parts for any possible damage incurred during shipping. Remove exhaust grille from unit.
- Page 5 MX1800 MODEL MX 1800 PARTS LIST FIGURE 6 ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION P1411 4" Pleated Pre-Filter (See Options Below) 33589-02 Pressure Switch 33536-01 Cabinet Assembly 1/2hp P1363 Cordset (115V) 33536-02 Cabinet Assembly 3/4hp P345 Cordset (230V)
- Page 6 MX1800 NOTES: ® AIR CLEANERS Products of Metal-Fab. Inc. P.O. Box 1138 • Wichtia, Ks 67201 (316) 943-2351 • FAX (316) 943-2717 © 1998 Metal-Fab, Inc. Form No. L804 1/98 5757 Litho in U.S.A.
Need help?
Do you have a question about the MX 1800 and is the answer not in the manual?
Questions and answers