Tighten the nuts against the unit to prevent section) loosening by vibration. The IE 1250 is equipped with a 4-way adjustable exhaust grille. Firmly secure four (4) chains of equal length to a firm, structural This can be positioned for the optimum air flow pattern. Adjust grille support.
IE 1250 Check the blower bearings for wear. Check the blower wheel for 2. If power is on and no voltage is measured on motor side of power debris and dirt, and clean when necessary. switch, then switch is defective and must be replaced.
Page 5
IE 1250 IE 1250 PART LIST FIGURE 3 Item Part Number Description Item Part Number Description 30401-01 Cabinet Weldment 30173-01 Ionizer Contact Assembly P1717 Motor, 110/22V, 3/4 HP P1727 On/Off Switch P1725 Motor Mount Braket P1718 Neon Lamp P1361 Blower...
Need help?
Do you have a question about the IE 1250 and is the answer not in the manual?
Questions and answers