Table of Contents
Advertisement
SWITCHING OFF
1.
If there is no audio input signal to the transmitter for 4 minutes, the transmitter
will go to standby mode and LED will change from Blue to Green.
2.
If the power adapter is unplugged, the LED on the transmitter will turn off.
3.
Speakers will turn to standby mode if there is no input signal to transmitter
and LED becomes Green. Speakers will automatically shut off when standby
mode continues for 5 minutes.
4.
Speakers will also turn to standby mode if you press the POWER button on
the remote control to Green LED. Speakers will automatically shut off after 5
minutes.
5.
At standby mode, speaker will turn to On automatically after getting a signal
from the transmitter.
OTHER CONTROLS
1. Select volume up and down on Speakers or Remote Control Unit.
2. Select Mood Light On/OFF by pressing the "Light" button on Speakers or
Remote Control Unit
3. If you hear interference from other components, re-adjust the tuning control by
moving channel switch to 1, 2 or 3 of the transmitter, then pressing the "AUTO
TUNE" button on speakers or remote unit for best reception.
TROUBLESHOOTING
NO SOUND
Ensure the AC adaptor is fully inserted into the AC outlet and the power
-
connection input on the transmitter.
Ensure the speakers are switched ON.
-
Speaker's battery capacity is too low, replace with new batteries or
-
connect the AC adaptors to the speakers.
Ensure the TV or audio component is ON.
-
The connected audio / video equipment is not playing. Start playing the
-
equipment.
The volume of speaker is too low; adjust the volume to an appropriate
-
level.
P.
Advertisement
Table of Contents
