INTRODUCTION This Floating Wireless Speaker System uses the latest 900 MHz wireless technology to enable you to enjoy music outdoors in your swimming pool. It is simple to connect the portable transmitter to typical audio sources such as an Ipod, Hi-Fi, CD/MP3 player or other audio source. INSIDE THE PACKAGE 1.
INSTALLATION TRANSMITTER Connect the supplied AC power adapter to an electrical wall outlet. Plug the AC power adapter in the DC jack located on the rear of the transmitter. Or you can insert 4 X “AA” size Alkaline batteries into the battery compartment at the bottom of the transmitter with correct polarity.
OPERATION 1. Turn on the transmitter. The LED will light up in Green. 2. Turn on the audio source (TV or audio component like an iPod) to which the transmitter is connected. The LED will change from Green to Blue. 3.
To ensure all water is out in between uses, the speaker cover can be opened by pushing on the cover as shown below. SWITCHING OFF If there is no audio input signal to the transmitter for a 4 minute period, the transmitter will go into standby mode and the LED will change from Blue to Green.
TROUBLE SHOOTING NO SOUND Too much water retention inside the speaker grill. Turn the speaker over and gently shake it to let the water drain out. Ensure you have fresh alkaline batteries for both transmitter and receiver if the speaker’s and/or transmitter’s battery charge is too low, sound distortion will be heard.
DIGITAL AUDIO guarantees this product for a period of 12 months from the original date of purchase. This guarantee covers repair or replacement of equipment if it proves to be faulty as a result of manufacturing faults or workmanship. No liability can be accepted for faults arising from accident or misuse.
Need help?
Do you have a question about the 5RFWS1 and is the answer not in the manual?
Questions and answers