The charger can only be used for rechargeable lead/acid batteries. • Do not recharge non-rechargeable batteries. • The charging wires can only be changed to other keepower wires. • If the supply cord is damaged, it must be replaced by authorised shop. •...
VRLA (valve-regulated lead-acid batteries), AGM and most GEL types. The Keepower 6V battery charger can be used to charge batteries from 1.2 Ah to 32 Ah and for trickle (maintenance) charging of batteries with up to 100 Ah.
Connect the red cable to the plus pole on the battery and the black cable to the minus pole. The Keepower 6V battery charger can then be connected via the adapter for charging. The cable to the adapter then remains permanently on the battery. It is recommended that the dummy con- nector be fitted if the battery is not being charged to avoid any contact between the sleeve and vehicle chassis.
Classic 6V Technical data CLASSIC MICRO SMALL MEDIUM LARGE XL-con XL-pro Nominal 12/24V 12/24V battery voltage Charge 0.8A 0.8A 30A/15A 30A/15A Current Battery size 1.2Ah to 32 Ah 1.2Ah to 32Ah 3Ah to 80Ah 20Ah to 160Ah 40Ah to 300Ah 90Ah to 600Ah 3Ah to 600Ah Max.