Using Universal Remote Control - IconBiT XDS8003D User Manual

iconBIT XDS8003D User Manual

2.2 Using Universal Remote control

1. Please target the Universal Remote Control to the TV Remote Control.
TV R.C
2. Please press the SET button for long time (about 3 seconds), and wait and see the LED
light is ON, the Universal RC is copying the TV R.C code.
3. Then please press the button Power, and the Universal RC LED light will be flash for one
time, and then press the TV R/C Power button again, and the LED light will display to
Flash-light for 3 times. And the Universal RC is preparing for the code-reading status.
And at the moment, the TV remote Power code is coped by the Universal RC Power
code.
4. At the Code-reading status, please press "AV/TV" button, the LED light flash by one
time, and then press TV remote control "Source/TV mode" button, the Universal RC LED
light will flash by 3 times. Then the TV/AV button code is coped by the Universal R/C.
Universal RC
8
English