Screen Blank Mode (For The Windows 7 Operating System Only); Sleep Mode; Hibernation Mode - Lenovo ThinkPad X250 Hardware Maintenance Manual

Hide thumbs Also See for ThinkPad X250:
Table of Contents

Advertisement

Screen blank mode (for the Windows 7 operating system only)

If the time set on the "Turn off monitor" timer in the operating system expires, the LCD backlight turns off.
To put the computer into screen blank mode, do the following:
1. Right-click the battery gauge on the taskbar.
2. Select Power off display.
To end screen blank mode and resume normal operation, press any key.

Sleep mode

When the computer enters sleep mode, the following events occur in addition to what occurs in screen
blank mode:
• The LCD is powered off.
• The hard disk drive or solid-state drive is powered off.
• The microprocessor stops.
To enter sleep mode, do one of the following:
• For Windows 7: Click the arrow beside the Shutdown icon from the Start menu, and then select Sleep.
To return from sleep mode, press the Fn key.
• For Windows 8 and Windows 8.1: Move the pointer to the bottom-right corner of the screen to display the
charms. Then click Settings ➙ Power ➙ Sleep.
In certain circumstances, the computer goes into sleep mode automatically:
• After a period of inactivity specified in power plan settings
• When the battery power is low
To cause the computer to return from sleep mode and resume operation, do one of the following:
• Press the Fn key.
• Open the LCD cover.
• Turn on the power button.

Hibernation mode

In hibernation mode, the following occurs:
• The system status, RAM, VRAM, and setup data are stored on the hard disk drive or solid-state drive.
• The system is powered off.
If you have defined one of the following actions as the event that causes the system to go into hibernation
mode, perform that action.
• Closing the lid.
• Pressing the power button.
Also, the computer goes into hibernation mode automatically after a period of inactivity specified in power
plan settings.
When the power is turned on, the computer returns from hibernation mode and resumes operation. The
hibernation file in the boot record on the hard disk drive or solid-state drive is read, and system status is
restored from the hard disk drive or solid-state drive.
.
Chapter 4
Related service information
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents