Aquatic LUXEAIR 22 AI22lux6636 Specification Sheet

luxEAIr 22
luxEAIr SErIES
Pump
Back Angle
35º
18"
Blower
no alternate pump/blower locations available.
66 1/4"
SPECIFICATIONS:

GeneRal SPecIfIcatIonS:

Tub Size 66 1/4" x 36" x 23 3/4"
168 cm x 91 cm x 60 cm
Bathing Well 42" long
22" wide
22" interior depth
Shipping Weight 248 lbs. / 112 kg
Weight w/Equipment 179 lbs. / 81 kg
Tub Weight Filled 885 lbs. / 401 kg
Gallons to Overflow 85 gal. / 322 L
Gallons to Operate 66 gal. / 250 L
Electrical Specifications:
Pump 1.75 HP; 12 AMP; 110V
Inline Heater 1.5 kW; 12.5 AMP; 110V
Requirement 1-15 AMP 2 pole, separate circuit
required protected with Class A GFCI
Blower 1 HP; 10.5 AMP; 110V
Requirement 1-15 AMP 1 pole, separate circuit
required protected with Class A GFCI
This whirlpool will need to be hard wired to the breaker box.
Three outlets will be supplied on the whirlpool.
fax-on-Demand
Document # 1206
The manufacturer accepts a 1/4" variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
32
# ai22lux6636
Model
Deck Width 1 3/4"
36"
22"
42"
23 3/4"
22"
StanDaRD equIPMent:
7 Hydrotherapy Jets including:
- 4 Full Size Pressure-Flo Hydrotherapy Jets
- 2 StressEaz Neck & Shoulder Therapy Jets
- 1 Recessed Rotary Massage Jet
air Bath System:
- 55 Air Jets
- 1 HP Variable Speed Air Blower with 20-Minute Timer
- Electronic Control Panel
- 3 Massage Settings: Constant, Wave and Pulse
- Automatic Purge and Dry Cycle
- 600 Watt Air Heating System
aquatic quality features:
- 1.75 HP Run-Dry Pump with 20-Minute Timer
- 1.5 kW Inline Maintenance Heater
- "Quiet Pad" Anti-Vibration Pump Mount for Quiet Pump Operation
- 2 Color Matched Grab Bars
- 2 Arm Rests
- Slip Resistant Floor
- Pre-leveled ABS Support Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
ul & IaPMo listed, factory tested
limited lifetime Warranty
36"
20 1/4"

oPtIonal equIPMent:

Chromatherapy LED Lighting
•
Comfort Pillow - Oval or Rectangle
•
Jet Finish
•
- Chrome, Polished Brass, Gold, Polished Nickel
Grab Bar
•
- White, Biscuit, Chrome, Polished Brass, Gold,
Lift & Turn Waste and Overflow
•
- Chrome, Polished Brass, Gold, Polished Nickel,
Cable Drive Waste and Overflow
•
- Chrome, Polished Brass, Gold, Polished Nickel,
Hand Held Jet - Chrome or Polished Brass
•
Factory Installed Rigid ABS Tile Flange
•
Color Matched Acrylic Skirt
•
Premium Colors
•
All acrylic colors featured by Aquatic match the
industry's leading fixture manufacturers.
Rough-In Plumbing
Measurements
2 1/4"
or Satin Nickel
Polished Nickel, Satin Nickel or Oil Rubbed Bronze
Satin Nickel or Oil Rubbed Bronze
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit Only)
www.aquaticwhirlpools.com 800.555.5324
March 2008
12"