Table of Contents
Advertisement
Quick Links
Revision: 0
USER MANUAL
NTW-VD1602
Network Routing Switcher Series
DIGITAL VIDEO ROUTER - 16x2
Miranda Technologies inc.
2323 Halpern, St-Laurent
(Quebec) Canada H4S 1S3
Tel.: (514) 333-1772
Fax: (514)333-9828
1101 N. Pacific Ave, suite 204
Glendale, CA 91202
Tel.: (305) 820-2990
Fax: (305) 820-2991
e-mail: techsupp@miranda.com
Technical specifications are subject to be changed without notice
Miranda USA
USA
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Miranda NTW-VD1602
Summary of Contents for Miranda NTW-VD1602
-
Page 1: User Manual
Revision: 0 USER MANUAL NTW-VD1602 Network Routing Switcher Series DIGITAL VIDEO ROUTER - 16x2 Miranda Technologies inc. 2323 Halpern, St-Laurent (Quebec) Canada H4S 1S3 Tel.: (514) 333-1772 Fax: (514)333-9828 Miranda USA 1101 N. Pacific Ave, suite 204 Glendale, CA 91202 Tel.: (305) 820-2990... -
Page 2: Table Of Contents
Revision: 0 Index Revision history General 1.1. Specifications 1.2. Connection drawing Power connection Connecting the NTW-VD1602 to your PC 3.1. Selection of router address 3.2. Pin-out of RS-232 connector 3.3. Maximum cable length MIDI connection 4.1. Several routers in one system 4.2. -
Page 3: Revision History
Revision: 0 0. Revision history Current revision of this document is the uppermost in the table below. Revision Replaces Date Change Description 10/10/00 Initial Revision Technical specifications are subject to be changed without notice... -
Page 4: General
360Mbit/s and automatic cable equalizing. The NTW-VD1602 offers the possibility to expand the router in the input direction up to 64x2. The NTW-VD1602 is well suited for all demanding routing tasks in digital studio and broadcast environments. -
Page 5: Power Connection
Connect the DB9 female connector from the desk top power supply to the main unit. Tighten the screws to assure a proper contact. To connect mains to the desk top power supply you need a mains cord with IEC 320 connector. NTW-VD1602 uses the desk top power model AC-10-84-10-005 (±5V / 10W). -
Page 6: Midi Connection
Revision: 0 4. MIDI connection Via the MIDI bus system several routers and control panels can be interconnected. The standard MIDI interface is used on all Network MIDI control ports. For interconnection between the devices a standard MIDI cable with 5pin DIN connector on both ends is used. -
Page 7: Maximum Distance Between Midi Devices
Revision: 0 4.5. Maximum distance between MIDI devices The standard MIDI definition allows a maximum cable length of 250 meters between two devices. Longer distances can be made with MIDI repeater units. To avoid grounding problems all Network MIDI ports have opto-coupled inputs. 5. -
Page 8: Router Extension Mode
Router extension mode Switch 5, 6 and 7 on the configuration switch set the router’s input offset in systems with 2 or more NTW-VD1602. You can build systems up to 64x2. The chosen input offset defines on which input range each NTW-VD1602 works on. -
Page 9: Input Extension
Revision: 0 7. Input extension NTW-VD1602 allows input extension up to 64x2. Please connect the routers as shown below. A 4x1 extension router is used to collect the signal from several units. Please refer to chapter 5.2 regarding input offset. -
Page 10: Control And Connection Of Network Systems, Interface Protocol
Revision: 0 8. Control and connection of Network systems, interface protocol 8.1. Important notes regarding the Network Control Protocol 8.1.1. Binary Code The strings shown on the next pages are in binary coded format. Please be aware of the fact that any terminal program you may use to control a Network unit from a PC must be able to generate hexadecimal characters. -
Page 11: Example: A Single Unit With No Midi Connected
RS232 The RS-232 port is used for external control of Network units. The RS-232 port allows the customer to control the equipment via Miranda's i-Control PC program or self-defined customized solutions. Connector for the RS-232 port is a DS9 female. -
Page 12: Commands
Revision: 0 8.5. Commands 8.5.1. Audio crosspoint set Only for use with Audio routers. Command for setting of crosspoints: 1001nnnn 0kkk kkkk 0vvv vvvv - nnnn is the matrix address from 0 up to 15. - kkk kkkk is the output which shall be controlled. kkk kkkk = output number 0 = output 1 127 = output 128... -
Page 13: General Environmental Requirements For Network Electronics Equipment
Revision: 0 General Environmental Requirements for Network Electronics Equipment 1. The equipment will meet the guaranteed performance specification under the following environmental conditions: • Operating room temperature range 0°C to 45°C Except of digital video routers 0°C to 40°C • Operating relative humidity range up to 90% (non-condensing) 2. - Page 14 Revision: 0 Network Electronics AS Hinderveien 4, 3204 Sandefjord, Norway Tel.: +47 33 48 99 99 Fax: +47 33 48 99 98 e-mail: support@networkgroup.no Declaration of Conformity with CE This apparatus meets the requirements of EN 55103-1 (November 1996) with regard to emissions, and EN 55103-2 (November 1996) with regard to immunity;...
Need help?
Do you have a question about the NTW-VD1602 and is the answer not in the manual?
Questions and answers