Advertisement
Using the Media Play Menu
Setup Menu
1. Press the
MENU
button. Press the ▲ or ▼ button to select Support,
then press the ENTERE button.
Language
2. Press the ▲ or ▼ button to select Media Play (USB), then press the
ENTERE button.
Set the menu language.
3. Press the ◄ or ► button to select an icon (Videos, Music, Photos),
✎
Press ◄ or ► button to select menu language. (According to the different areas,
then press the ENTERE button.
some countries have only one language.)
✎
It might not work properly with unlicenced multimedia files.
✎
Time
If you want to view detailed information of the file being played, press
button in the file list, and then select Information.
✎
✎
The current time will appear every time you press the
INFO
button.
Need-to-Know List before using Media Play (USB)
Supported file systems are FAT and NTFS.
■ Clock Set: Set the Year, Month, Day, Hour, Minute.
•
•
Certain types of USB Digital camera and audio devices may not
■ On Timer/Off Timer
be compatible with this TV.
✎
•
Media Play only supports USB Mass Storage Class (MSC)
Current time should be set first by Clock Set.
devices. MSC is a Mass Storage Class Bulk-Only Transport
Repeat: Set the timer to repeat by Once, Everyday, Mon~Fri,
Mon~Sat, Sat~Sun, Sun.
device. Examples of MSC are Thumb drives and Flash Card
Readers. Devices should be connected directly to the TV's USB
Select Off to turn of Repeat.
port. (USB HDD is not supported.) Does not support smart
Hour/Minute: Enter the hour and minute for the TV to turn on or off.
devices connected in MTP or PTP protocol.
Contents: Select TV.
Before connecting your device to the TV, please back up your files
•
Channel: Select the channel to be played when the TV turns on
to prevent them from damage or loss of data. SAMSUNG is not
automatically.
responsible for any data file damage or data loss.
Volume: Select the volume level when TV turns on automatically.
A USB device that requires high power (more than 0.5A) may not
•
be supported.
■ Sleep Timer t
Do not disconnect the USB device while it is loading.
•
Automatically shuts off the TV after a preset period of time. (Off, 30
•
The higher the resolution of the image, the longer it takes to
min, 60 min, 90 min, 120 min, 150 min and 180 min)
display on the screen.
✎
To cancel Sleep Timer, select Off.
•
The maximum supported JPEG resolution is 15360 x 8640 pixels.
If a file is corrupted or the TV does not support the file type, the "Not
•
Melody
Supported File Format" message appears.
If a USB extension cable is used, the USB device may not be
•
Set so that a melody plays when the TV is turned Off, Low, Medium
recognized or the files on the device may not be read.
and High.
•
The TV cannot play MP3 files with DRM that have been
✎
downloaded from a for-pay site. Digital Rights Management
The Melody does not play.
(DRM) is a technology that supports the creation, distribution, and
− When no sound is output from the TV because the volume has
POWER
P
management of digital content in an integrated and comprehensive
been reduced to minimum with the
VOL –
button.
way, including protecting the rights and interests of content
− When the TV is turned off by Sleep Timer function.
providers, preventing illegal copying of contents, and managing
billings and settlements.
•
PTP device is not supported.
Support Menu
If an over-power warning message is displayed while you are
•
connecting or using a USB device, the device may not be
❑ Using the Media Play
recognized or may malfunction.
The power-saving mode of some external hard disk drives may be
•
Enjoy photos, music and/or movie files saved on a
released automatically when your connect them to the TV.
USB Mass Storage Class (MSC) device.
If a USB device connected to the TV is not recognized, the list of
MEDIA.P
•
files on the device is corrupted, or a file in the list is not played,
connect the USB device to a PC, format the device, and check
the connection.
If a file you deleted from the PC is still found when you run Media
•
Play, use the "Empty the Recycle Bin" function on the PC to
permanently delete the file.
Connecting a USB Device
Photos only supports sequential jpeg format.
•
1. Turn on your TV.
•
The scene search and thumbnail functions are not supported in
the Videos.
2. Connect a USB device containing photo, music and/or movie files to
•
If the number of files and folders saved on a USB storage device is
the USB jack on the side of the TV.
approximately over 4000, the files and folders may not appear and
3. When USB is connected to the TV, you can select Media Play.
some folders may not be opened.
✎
The maximum displayed number of partition is 4.
•
The maximum displayed number of files, including sub folders, in
one folder of USB storage device is 2000.
•
The media may not be playing smoothly when using the device
higher than USB 2.0.
✎
The maximum displayed number of partition is 4.
The file name only works in supported menu language. The other
•
language is not displayed properly.
- 9 -
Troubleshooting
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit "www.samsung.com," then click
on Support, or contact the call centre listed on the back-cover of this manual.
Problem
Possible Solution
Picture Quality
The TV image does not look as good as it
y If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD
did in the store.
(high definition) picture quality.
y Antenna connection: Try HD stations after performing Auto tuning.
✎
Many HD channels are up scaled from SD(Standard Definition) contents.
y Adjust the Cable/Set top box video output resolution to 1080i or 720p.
y Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal.
The picture is distorted: macroblock error,
y Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action
small block, dots, pixelization
movies.
y Low signal level or bad quality can cause picture distortion. This is not a TV issue.
y Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and digital TV.
Colour is wrong or missing.
y If you're using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or
loose connections may cause colour problems or a blank screen.
There is poor colour or brightness.
y Adjust the Picture options in the TV menu. (go to Picture Mode / Colour / Brightness / Sharpness)
y Try resetting the picture to view the default picture settings. (go to
MENU
- Picture - Picture Reset)
There is a dotted line on the edge of the
y If the picture size is set to Screen Fit, change it to 16:9.
screen.
y Change cable/satellite box resolution.
The picture is black and white.
y If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the TV.
When changing channels, the picture
y If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable box
freezes or is distorted or delayed.
reboots. It may take up to 20 minutes.
y Set the output resolution of the cable box to 1080i or 720p.
Sound Quality
There is no sound or the sound is too low at
y Please check the volume of external device connected to your TV.
maximum volume.
The picture is good but there is no sound.
y Set the Speaker Select option to TV Speaker in the sound menu.
y If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV.
y If you are using an external device, check the device's audio output option (ex. you may need to change your cable box's
audio option to HDMI when you have a HDMI connected to your TV).
y If you are using a HDMI cable, a separate audio cable is required.
y If your TV has a headphone jack, make sure there is nothing plugged into it.
The speakers are making an inappropriate
y Check the cable connections. Make sure a video cable is not connected to an audio input.
noise.
y For antenna or cable connections, check the signal strength. Low signal level may cause sound distortion.
No Picture, No Video
The TV will not turn on.
y Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
y Make sure the wall outlet is working.
y Try pressing the
POWER
button on the TV to make sure the problem is not the remote. If the TV turns on, refer to "The
remote control does not work" below.
The TV turns off automatically.
y Ensure the Sleep Timer is set to Off in the Time menu.
y If your PC is connected to the TV, check your PC power settings.
y Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
y When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no signal.
There is no picture/video.
y Check cable connections (remove and reconnect all cables connected to the TV and external devices).
y Set your external devices' (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input.
For example, if an external device's output is HDMI, it should be connected to an HDMI input on the TV.
y Make sure your connected devices are powered on.
y Be sure to select the TV's correct source by pressing the
SOURCE
button on the TV remote.
- 13 -
[UH5003-SEA]BN68-06750E-01ENG.indb 2
■ Videos
Other Restrictions
1. Press the ◄ or ► button to select Videos, then press the ENTERE
y Video content will not play, or not play correctly, if there is an error in the
button in the Media Play menu.
content or the container.
2. Press the ◄/►/▲/▼ buttons to select the desired video in the file list.
y Sound or video may not work if the contents have a standard bit rate/
3. Press the ENTERE button or
(Play) button.
frame rate above the compatible Frame/sec listed in the table above.
-
The selected file is displayed on the top with its playing time.
y If the Index Table is in error, the Seek (Jump) function is not supported.
-
y The menu may take longer to appear if the video's bit rate exceeds
If video time information is unknown, playing time and the progress bar are not
10Mbps.
displayed.
-
y Video content can not be played, if there are many contents in one file.
During video playback, you can search using the ◄ and ► button.
TOOLS
-
You can use (
) (REW) and (
) (FF) buttons during playback.
Video Decoder
✎
In this mode, you can play movie clips contained in a game, but you cannot play
Supports up to H.264, Level 4.1
the game itself.
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
MPEG4 SP, ASP :
y Supported Subtitle Formats
– Below 1280 x 720: 60 frame max
-
– Above 1280 x 720: 30 frame max
External
H.263 is not supported.
Name
File extension
GMC is not support.
MPEG-4 timed text
.ttxt
SAMI
.smi
Audio Decoder
SubRip
.srt
Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO
SubViewer
.sub
WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode of WMA Pro is not
Micro DVD
.sub or .txt
supported)
SubStation Alpha
.ssa
WMA Lossless is not supported.
Advanced SubStation Alpha
.ass
Music
-
Internal
1. Press the ◄ or ► button to select Music, then press the ENTERE
Name
Container
Format
button in the Media Play menu.
Xsub
AVI
Picture Format
2. Press the ◄/►/▲/▼ buttons to select the desired Music in the file list.
SubStation Alpha
MKV
Text Format
3. Press the ENTERE button or
Advanced SubStation Alpha
MKV
Text Format
✎
SubRip
MKV
Text Format
During music playback, you can search using the ◄ and ► button.
MPEG-4 Timed text
MP4
Text Format
✎
(REW) and
(FF) buttons do not function during play.
✎
y Supported Video Formats
Only displays the files with MP3 file extension. Other file extensions are not
displayed, even if they are saved on the same USB device.
File
Frame
Container
Video Codec
Resolution
Bit rate(Mbps)
Audio Codec
✎
Extension
rate(fps)
If the need to change Equalizer - when playing MP3, then exit Media Play, adjust
DivX 3.11/4.12/5.x/6.0
1920x1080
6~30
20Mbps
the Equalizer in the Sound menu. (An over-modulated MP3 file may cause a sound
H.264
1920x1080
6~30
20Mbps
MP3 / ADPCM /
problem.)
*.mp4
MP4
VC-1
1920x1080
6~30
20Mbps
AAC
MJPEG
640x480
6~30
10Mbps
■ Photos
DivX 3.11/4.12/5.x/6.0
1920x1080
6~30
20Mbps
1. Press the ◄ or ► button to select Photos, then press the ENTERE
MP3 / AC3 /
MPEG 1/2/4
1920x1080
6~30
20Mbps
*.avi
AVI
LPCM / ADPCM
button in the Media Play menu.
*.mkv
MKV
H.264
1920x1080
6~30
20Mbps
/ DTS
2. Press the ◄/►/▲/▼ buttons to select the desired photo in the file list.
MJPEG
640x480
6~30
10Mbps
DivX 3.11/4.12/5.x/6.0
1920x1080
6~30
20Mbps
MP3 / AC3 /
3. Press the ENTERE button or
*.asf
ASF
MPEG 1/2/4
1920x1080
6~30
20Mbps
LPCM /ADPCM /
*.wmv
✎
H.264
1920x1080
6~30
20Mbps
WMA / WMA Pro
NOTE
x
*.ts
MPEG2-TS
1920x1080
6~30
20Mbps
While a photo list is displayed, press the
AC3 / AAC /
*.trp
TS
MP3 / DD+
control to start the slide show.
*.tp
H. 264
1920x1080
6~30
20Mbps
x
*.dat
MPEG1
1920x1080
6~30
20Mbps
All files in the file list section will be displayed in the slide show.
*.mpg
AC3 / MPEG /
MPEG2
1920x1080
6~30
20Mbps
x
PS
During the slide show, files are displayed in order.
*.mpeg
LPCM / AAC
H. 264
1920x1080
6~30
20Mbps
*.vob
x
During the slide show, you can adjust the slide show speed using (
MPEG 1/2/4
1920x1080
6~30
20Mbps
*.3gp
3GPP
MP3
) (FF) button.
H.264
1920x1080
6~30
20Mbps
x
H.264
1920x1080
6~30
20Mbps
You can move to other file using ◄ or ► button.
*.flv
flash formats
MP3
Sorenson H.263
1920x1080
6~30
20Mbps
y Supported Photo Formats
Image
Base-line
JPEG
Progressive
- 10 -
Problem
Possible Solution
RF(Cable/Antenna) Connection
The TV is not receiving all channels.
y Make sure the Antenna cable is connected securely.
y Please try Setup (Plug & Play) to add available channels to the channel list. Go to
wait for all available channels to be stored.
y Verify the Antenna is positioned correctly.
The picture is distorted: macroblock error,
y Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action
small block, dots, pixelization
movies.
y A low signal can cause picture distortion. This is not a TV issue.
PC Connection
A "Mode Not Supported" message
y Set your PC's output resolution so it matches the resolutions supported by the TV.
appears.
The video is OK but there is no audio.
y If you are using a HDMI connection, check the audio output setting on your PC.
Others
The picture will not display in full screen.
y HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
y Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV.
y Adjust the picture size options on your external device or TV to full screen.
The remote control does not work.
y Replace the remote control batteries with the poles (+/–) in the right direction.
y Clean the transmission window located on the top of the remote control.
y Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control does
y Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the
not turn the TV on or off, or adjust the
SAMSUNG TV code.
volume.
A "Mode Not Supported" message
y Check the supported resolution of the TV, and adjust the external device's output resolution accordingly. Refer to resolution
appears.
settings in this manual.
There is a plastic smell from the TV.
y This smell is normal and will dissipate over time.
TV is tilted to the right or left side.
y Remove the stand base from the TV and reassemble it.
There are difficulties assembling the stand
y Make sure the TV is placed on a flat surface. It is necessary to use magnetized screw driver if you cannot remove the screws
base.
from the TV.
The Broadcasting menu is grey out
y The Broadcasting menu is only available when the TV source is selected.
(unavailable).
Your settings are lost after 5 minutes or
y If the TV is in the Store Demo mode, it will reset audio and picture settings every 5 minutes. If you want to change the settings
every time the TV is turned off.
from Store Demo mode to Home Use.
You have intermittent loss of audio or video.
y Check the cable connections and reconnect them.
y Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long
term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.
You see small particles when you look
y This is part of the product's design and is not a defect.
closely at the edge of the frame of the TV.
There are recurrent picture/sound issues.
y Check and change the signal/source.
A reaction may occur between the rubber
y To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
cushion pads on the base stand and the
top finish of some furniture.
✎
This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen.
These pixels will have no impact on the performance of the product.
✎
You can keep your TV as optimum condition upgrading the latest firmware on web site (www.samsung.com → Support) by USB.
- 14-
Other Restrictions
CMYK, YCCK Colour space JPEG are not supported.
■ Playing Multiple Files
Playing selected video/music/photo files
1. Press the Yellow button in the file list to select the desired file.
2. Repeat the above operation to select multiple files.
✎
NOTE
x
The c mark appears to the left of the selected files.
x
To cancel a selection, press the Yellow button again.
x
To deselect all selected files, press the
TOOLS
button and select Deselect All.
■ Playing the video/music/photo file group
While a file list is displayed, move to any file in desired group.
■ Media Play - Additional Functions
Videos/Music/Photos Play Option menus
When playing a file, press the
TOOLS
button.
Category
Operation
Videos
Music
Photos
Title
You can move the other file directly.
c
Repeat Mode
You can play movie and music files repeatedly.
c
c
Picture Size
You can adjust the picture size to your preference.
c
Picture Mode
You can adjust the picture setting.
c
c
c
c
Sound Mode
You can adjust the sound setting.
You can play the video with Subtitles. This
Subtitle
function only works if the subtitles are the same
c
Settings
file name as the video.
You can change the audio language if the video
Audio language
c
has more than one language.
(Play) button.
Stop Slide
Show / Start
You can start or stop a Slide Show.
c
Slide Show
Slide Show
You can select the slide show speed during the
c
Speed
slide show.
Zoom
You can zoom into images in full screen mode.
c
Rotate
You can rotate images in full screen mode.
c
Information
You can see detailed information about the played file.
c
c
c
❑ DivX® Video On Demand
Shows the registration code authorized for the TV. If you connect to
the DivX web site and register with 10-digit registration code, you can
(Play) button.
download the VOD activation file. Once you play it using Media Play, the
registration is completed.
✎
For more information on DivX® VOD, visit http://vod.divx.com.
(Play) / ENTERE button on the remote
❑ Using the Soccer Mode
Soccer Mode t
) (REW) or (
This mode provides optimised condition for watching sports games.
Zoom: Pause playback and dived the picture into 9 parts. Select a part
to zoom it in. Press this button again to resume.
✎
When Soccer Mode is On, the picture and sound modes are set to Stadium
Photo
Resolution
automatically.
15360 x 8704
✎
If you turn the TV off while watching Soccer Mode, the Soccer Mode will be
1024 x 768
disable.
✎
Mode name may vary depending on nations. Cricket Mode, Soccer Mode,
Sports Mode.
Storage and Maintenance
✎
If you remove the attached sticker on the TV screen, clean the residues and then watch TV.
MENU
- System - Setup (Plug & Play) and
Do not spray water directly onto the product. Any liquid that goes into the
product may cause a failure, fire, or electric shock.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
✎
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
x
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
✎
The appearance may differ depending on the product.
✎
Be careful when you contact the TV because some parts can be somewhat hot.
Installation with a stand.
10 cm
10 cm
10 cm
Licence
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that has passed rigorous
testing to verify that it plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration
code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under a license from U.S. Patent No's: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567,
7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS
Premium Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.
Manufactured under a license from U.S. Patent No's: 6,285,767, 8,027,477, 5,319,713, 5,333,201, 5,638,452, 5,771,295, 5,970,152, 5,912,976,
7,200,236, 7,492,907, 8,050,434, 7,720,240, 7,031,474, 7,907,736 and 7,764,802. DTS, the Symbol, and DTS and the Symbol together are
registered trademarks & DTS Studio Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
Open Source License Notice
Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com)
Open Source Licence Notice is written only English.
Recommendation - Jordan Only
Hereby, Samsung Electronics, declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
The original Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name.
This equipment may be operated in Jordan.
❑ Using the Screen&Sound Capture mode
Other Information
Screen&Sound Capture mode
Installing the Wall Mount
This mode provides a way to capture the images and audio.
The wall mount kit (sold separately) allows you to mount the TV on
Press
and the Screen&Sound Capture mode will be turned on, or
the wall. For detailed information on installing the wall mount, see the
press
MENU
button, enter Support Menu select Screen&Sound Capture.
instructions provided with the wall mount. Contact a technician for
Press
again the Screen&Sound Capture mode will be turned off.
assistance when installing the wall mount bracket.
✎
Samsung Electronics is not responsible for any damage to the product
Before enabling the Screen&Sound Capture mode, the USB device should be
or injury to yourself or others if you select to install the TV on your own.
connected first.
✎
Media Play mode not available.
Wall Mount Kit Specifications (VESA)
✎
The wall mount kit is not supplied, but sold separately.
Screen Capture
Install your wall mount on a solid wall perpendicular to the floor. When
attaching to other building materials, please contact your nearest dealer.
After turning on the Screen&Sound Capture mode, press
to make a
current screen capture.
If you install the TV on a ceiling or slanted wall, it may fall and result in
severe personal injury.
Items are stored in Photos folder in Media Play.
✎
✎
NOTE
At least after 15 seconds the next capture can be operated again.
•
Standard dimensions for wall mount kits are shown in the table
below.
Sound Recording
•
When purchasing our wall mount kit, a detailed installation manual
After turning on the Screen&Sound Capture mode, press
to make a
and all parts necessary for assembly are provided.
recording of the current sound, press
again to stop the recording.
Do not use screws that do not comply with the VESA standard
•
screw specifications.
Items are stored in Music folder in Media Play.
Do not use screws longer than the standard dimension, as they
✎
•
If you press any key, Audio Recording will be stopped.
may cause damage to the inside of the TV set.
•
For wall mounts that do not comply with the VESA standard screw
View Content
specifications, the length of the screws may differ depending on
the wall mount specifications.
Press
to get into Media Play.
•
Do not fasten the screws too firmly. This may damage the product
Press ◄ or ► button to select Music for items of recording or Photos for
or cause the product to fall, leading to personal injury. Samsung is
items of capturing.
not liable for these kinds of accidents.
✎
Screen&Sound Capture are for personal use only, not for commercial purpose
•
Samsung is not liable for product damage or personal injury when
and/or communication to the public.
a non-VESA or non-specified wall mount is used or the consumer
✎
fails to follow the product installation instructions.
The user may not use these features for commercial purposes without prior
approval from the copyright owners and/or to use it unlawfully.
•
Do not mount the TV at more than a 15 degree tilt.
✎
•
Always have two people mount the TV on a wall.
Samsung does not accept responsibility for any misuse of the service.
Product
❑ Default Recording Device
Models
Family
You can set the default device for saving captured image files and recorded
audio files.
UA40H5003
✎
UA48H5003
This function is only available when the USB device is connected the TV, and
LED-TV
Screen&Sound Capture mode is on.
UA40H5008
UA48H5008
❑ Software Upgrade
Software Upgrade can be performed by downloading the latest firmware
from "www.samsung.com" to a USB memory device.
❑ HD Connection Guide
You can read a guide to connect external devices for HD sources.
❑ Contact Samsung
View this information when your TV does not work properly or when you
want to upgrade the software. You can find information regarding our call
centres, and how to download products and software.
- 11 -
Specifications
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Model Name
Clean the product with a soft cloth dampened with in a small amount of water.
Do not use a flammable liquid (e.g. benzene, thinners) or a cleaning agent.
Display Resolution
Screen Size
Sound
Output
Dimensions (W x H x D)
Body
With stand
Weight
Without stand
With stand
✎
Installation with a wall-mount.
Design and specifications are subject to change without prior notice.
✎
For information about the power required and more about power consumption, refer to the label attached to the product.
10 cm
✎
The option may differ depending on country.
10 cm
10 cm
10 cm
- 15 -
Securing the TV to the Wall
Caution
: Pulling, pushing, or climbing onto the TV may cause
the TV to fall. In particular, ensure that your children do not hang
over or destabilize the TV; doing so may cause the TV to tip over,
resulting in serious injuries or death. Follow all safety precautions
provided on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.
To prevent the TV from falling
✎
Since the necessary clamps, screws, and string are not supplied, please
purchase these additionally.
1. Put the screws into the clamps and firmly fasten them onto the wall.
Confirm that the screws have been firmly installed onto the wall.
✎
You may need additional material such as an anchor depending on the type of
wall.
✎
Since the necessary clamps, screws, and string are not supplied, please
purchase these additionally.
2. Remove the screws from the back Centre of the TV, put the screws
into the clamps, and then fasten the screws onto the TV again.
✎
Screws may not be supplied with the product. In this case, please purchase the
screws of the following specifications.
3. Connect the clamps fixed onto the TV and the clamps fixed onto the
wall with a strong cable and then tie the string tightly.
✎
Note
x
Install the TV near to the wall so that it does not fall backwards.
x
It is safe to connect the string so that the clamps fixed on the wall are equal to
or lower than the clamps fixed on the TV.
x
Untie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check
connections for any sign of fatigue for failure. If you have any doubt
about the security of your connections, contact a professional
installer.
Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used
VESA scew hole specs
Standard
Quantity
to physically fix the system when using it in a public place. Refer to the
(A * B) in millimeters
Screw
manual provided with the Kensington Lock for additional information on
proper use.
✎
Please find a "K" icon on the rear of the TV. The Kensington slot is beside the
200 X 200
M8
4
"K" icon.
✎
The position and colour may differ depending on the model.
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object
such as desk or chair.
Do not install your Wall Mount
2. Slide the end of the cable with the lock attached through the looped
Kit while your TV is turned on.
end of the Kensington lock cable.
It may result in personal injury
3. Insert the locking device into the Kensington slot on the product.
due to electric shock.
4. Lock the lock.
✎
These are general instructions. For exact instructions, see the User manual
supplied with the locking device.
✎
The locking device has to be purchased separately.
✎
The location of the Kensington slot may be different depending on the TV model.
- 12 -
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
UA40H5003
UA48H5003
UA40H5008
UA48H5008
1920 x 1080
100 cm
121 cm
10W x 2
90.5 x 52.5 x 9.1 cm
108.3 x 63.7 x 9.0 cm
90.5 x 56.2 x 19.6 cm
108.3 x 67.7 x 20.3 cm
6.4 kg
9.0 kg
7.1 kg
9.8 kg
- 16 -
2014-08-12 오후 4:10:34
Advertisement
