Util Command - IBM 5110 Basic Reference Manual

44
[PRINT] GDI R [integer]] [,dev-address]
{
'old file name' }
FILEID file-num ,'new file name' [,dev-address]
file-num, 'old file name'
va
LI D [[new va 1-1 D] , [ new owner-ID] , {
~~
F } , [ dev-address] ]
UTIL
{~~~:}
{file-ref} [,dev-address]
PROTECT [OFF,] file-ref [,dev-address]
SORT
SYS new dev-address default
UTIL COMMAND
You can use the UTIL command to do the following:
• Display or print a directory of file information currently on tape or diskette.
• Rename a file on diskette.
• Change or display a diskette volume ID and/or owner ID.
• Eliminate a file from diskette and make that file space available for
allocation for other files, or discontinue the contents of a file on diskette or
tape while leaving the file space allocated.
• Write protect a file or remove write protection from a file (diskette only).
• Transfer system control to the optional diskette sort feature.
• Change the system default device address.
'
....
'
'
.....
",
.'
......
_
........