Panasonic SC-NS55 Operating Instructions Manual page 8

Discs (continued)
Advanced play Advanced play
Repeat play Repeat play
You can repeat program play or other selected play mode.
CD MP3
Press [REPEAT] before or during play.
"REPEAT ON" and "
To cancel
Press [REPEAT] again.
"REPEAT OFF" is displayed and "
Note
• This unit can play MP3 fi les and CD-DA format audio CD-R/RW
that have been fi nalized.
• It may not be able to play some CD-R/RW depending on the
condition of the recording.
• Do not use irregularly shaped discs.
• Do not use discs with labels and stickers that are coming off or with
adhesive exuding from under labels and stickers.
• Do not attach extra labels or stickers on the disc.
• Do not write anything on the disc.
CD
• This unit can access up to 99 tracks.
• Choose a CD with this mark:
8
NS55_GN-En.indd 8 NS55_GN-En.indd 8
Numeric
buttons
" are displayed.
" is cleared.
Program play Program play
This function allows you to program up to 24 tracks.
CD
Press [CD 6] and then [ 7 ].
1
Press [PROGRAM].
2
3 Press the numeric buttons to select your desired
track.
Repeat this step to program other tracks.
Press [CD 6] to start play.
4
MP3
Press [CD 6] and then [ 7 ].
1
Press [PROGRAM].
2
3 Press [ALBUM or ] to select your desired
album.
¢
Press / ] once and then the numeric buttons to
4 [
select your desired track.
5 Press [ENTER].
Repeat steps 3 to 5 to program other tracks.
Press [CD 6] to start play.
6
For two-digit track, press [h10] once, and then the two
digits.
For three-digit track, press [h10] twice, and then the three
digits.
To Action
cancel program Press [PROGRAM] in the stop mode.
mode
Press [PROGRAM] then [CD 6].
replay the program
check program Press [ /4] or [ /¢] when "PGM" is
contents displayed in the stop mode.To check while
programming, press [PROGRAM] twice
after "PGM" appears, then press [ /4]
or [ /¢] .
add to the program
CD
Repeat step 3 in the stop mode.
MP3
Repeat steps 3 to 5 in the stop mode.
clear the last track Press [DEL] in the stop mode.
clear all Press [CLEAR] in the stop mode.
programmed tracks "CLR ALL" is displayed.
Note
• When you try to program more than 24 tracks "PGM FULL"
appears.
• The program memory is cleared when you open the disc tray.
CD
• During program play, you can search backward or forward only
within the current track.
Using DualDiscs
The "CD" sides of DualDiscs do not meet the CD-DA standard so it
may not be possible to play them on this unit.
MP3
• Files are treated as tracks and folders are treated as albums.
• This unit can access up to 999 tracks, 255 albums and 20 sessions.
• Disc must conform to ISO9660 level 1 or 2 (except for extended
formats).
• To play in a certain order, prefi x the folder and fi le names with the
3-digit numbers in the order you want to play them.
2/16/07 11:15:06 AM 2/16/07 11:15:06 AM