Simplicity SSP210 Instruction Manual page 18

PROBLEM
No Steam.
Water drips from the Pressing
Plate.
The Pressing Handle will not
move the maximum pressure
position
Page16
CAUSE
Water Level is too low.
Controls have not been properly set.
Steam Button has been pressed
too long.
Item on the Ironing Board is too
thick to use this pressure.
SOLUTION
Fill the water tank.
If suitable for the fabric, make a selection
to a higher temperature. Wait for the Steam
Ready Light to come on or use spray
misting bottle as directed.
Don t press the Steam Button more
than 5 seconds continuously.
Use lighter pressure on thicker items.
Use added steam for wrinkles.
Simplicity Digital quik Press Instruction Manual