Aa A O Finishing Pressing / Storing The Unit - Simplicity SSP210 Instruction Manual

STEP 7 - FINISHING PRESSING/STORING THE UNIT
a. Water may be left in the reservoir, because it will not drip out when the
machine is stored in an upright position. However, it is recommended that if
the machine will be stored for some time, that all the water in the unit
should be drained by pressing the Steam Burst Button until all of the water
is pumped out.
b. Press the POWER button, the Red Power Light will go out. Unplug the unit
and leave in the open position.
c. Wait for the Steam Press to cool completely (approximately 30 minutes).
d. When cool, lower the Pressing Plate onto the Ironing Board pushing the
handle to its lowest position.
e. Turn the Locking Knob to the locked position. This will prevent the Steam
Press from opening while being moved or stored.
f. Loosely wrap the electric cord and place it in the opening at the front of the
base of the Ironing Board. You are now ready to store the unit.
Simplicity Digital Quik Press Instruction Manual Page9