Honda 2004 Accord Online Reference Owner's Manual page 232

Replacing Rear Bulbs
(in Fenders)
COVER
1. Open the trunk.
2. Remove the light assembly cover
by pulling its outside edge.
3. Remove the socket by turning it
one-quarter turn counterclockwise
and pull the bulb straight out of its
socket.
4. Push a new bulb straight into the
socket until it bottoms, and
reinstall the socket into the light
BULBS assembly by turning it clockwise
until it locks.
5. Test the lights to make sure the
new bulb is working.
6. Reinstall the light assembly cover.
SOCKETS
Replacing Rear Bulbs
(in Trunk Lid)
TRIM CLIPS
1. Open the trunk.
2.
6-cylinder models
Remove the trim clips from the
right or left corner of the trunk lid
trim by carefully prying them
using a small, flat-tip screwdriver
wrapped with tape.
Maintenance
Lights
CONTINUED
233