Rewind Button; Fast Forward Button; Slow Motion Button; Tips On Improving Pause Performance - Hauppauge WinTV-PVR-250 Installation And Reference Manual

onds. For example, if you want to repeat the audio/video you saw 10
seconds ago, you would click the Replay button once. If you want to
see the video you saw one minute ago, you would need to click the
Replay button six times.
For extended replay times, you might find it more convenient to grab
the Video Position indicator control bar and move it to the left. Once you
let the control bar go, audio/video starts to play (it might take a few sec-
onds for the WinTV2000 application to start playing). You might have to
move the Video Position indicator to the left and right to find the desired
spot to start replaying audio/video.
While Replaying, your audio/video program continues to be recorded in
the Replay Buffer. Therefore, if you have clicked the Replay button 3
times (so that you are replaying the audio/video seen 30 seconds ago),
the video you see in the WinTV window will be 30 seconds behind the
"live" audio/video program.
Skip Ahead Button:
Clicking the Skip button will skip the video ahead 10 seconds.

Rewind Button:

Clicking the Rewind button while playing video will rewind the recorded
video. Clicking the Rewind button again will continue the playing.

Fast Forward Button:

Clicking the Fast Forward button one time will fast forward your video
at 2X speed. Clicking the Fast Forward button two times will fast for-
ward your video at 8X speed.

Slow Motion Button:

Clicking the Slow Motion button, will play the video in Slow Motion.
Clicking the Slow Motion button again, will continue playing normally.

Tips on improving pause performance

Do not use DoubleSpace or any other disk compression scheme! This
severely slows down your hard disk.
WinTV-PVR Installation and Reference Manual
4-3