Installing The Wintv-Pvr Driver Under Windows Me; Installing The Wintv-Pvr Driver Under Windows Xp - Hauppauge WinTV-PVR-250 Installation And Reference Manual

WinTV-PVR Installation and Reference Manual
Note: If a message stating "Windows was unable to locate a driver for
this device", you did not wait long enough for the WinTV Installation CD-
ROM to be read. Click Back and then click Next again for the CD to be
recognized.
When the window Windows
has finished installing the
software that your new hard-
ware device requires opens,
click Finish.
This completes the PVR driver installation for Windows 98SE. continue
to chapter 2 to install the WinTV Application software.
Note: On those WinTV models equipped with remote control, after
rebooting your PC, the Remote Control will be enabled.
Installing the PVR driver under Windows Me
When re-starting Windows for
the first time after the WinTV
board is installed, the Add New
Hardware Wizard will open.
Insert the WinTV Installation
CD-ROM and select Automatic
search for a better driver
device (Recommended).
Click Next.
The Copying Files window will
open and you will see a number
of files being copied to your hard
disk drive.
When the window Windows has
finished installing the software
that your new hardware device
requires opens, click Finish.
1-5