Instruction Manual SOUTHERN PACIFIC 2-10-2 F4/F5 ELECTRIC ACCUCRAFT COMPANY 33268 Central Avenue Union City, CA 94587 Tel: 510-324-3399 Fax: 510-324-3366 Email: info@accucraft.com Copyright 2007...
Page 2
Instruction Manual SP 2-10-2 F4/F5 Instruction Manual SP 2-10-2 F4/F5 NOTES: Prototype Information The Southern Pacific 2-10-2’s were general purpose locomotives and were used system wide. The stand out news story about this class of SP loco was that in 1922 twenty 2-10-2’s were shipped from Baldwin in one train across the country and that train was called the Prosperity Special.
Page 3
Instruction Manual SP 2-10-2 F4/F5 Instruction Manual SP 2-10-2 F4/F5 NOTES: General information about Southern ally been found on metal locomotive Pacific 2-10-2: models. The drawbar on this model is just what its name implies; a draw- bar only. Power is routed from front to This accurately detailed model is con- structed of brass and stainless steel.
Page 4
The locomotive drive rods are stainless steel with sharp edges. OPERATORS MUST NOT COME IN CONTACT WITH A MODEL THAT IS BEING POWERED AT ANY TIME. UNDER NO CIRCUMSTANCES SHALL ACCUCRAFT TRAINS BE RESPONSIBLE FOR ANY INCIDENTAL OR CON- SEQUENTIAL DAMAGES ARISING IN REGARD TO ANY ACCUCRAFT PRODUCT.
Page 5
Instruction Manual SP 2-10-2 F4/F5 Instruction Manual SP 2-10-2 F4/F5 Lubrication: surfaces to avoid having shiny areas. Use a type of oil that is a bit heavier to Please lubricate your Accucraft Model lubricate the axle bushings and pivot points of the lead and trailing trucks.
Page 6
Instruction Manual SP 2-10-2 F4/F5 Instruction Manual SP 2-10-2 F4/F5 Please read following directions be- fore unpacking your locomotive. or greasy spots from the painted dur- 4. Place taped locomotive on a fl at Electrical Pickup surface. Carefully cut the tape along faces use alcohol on a soft, lint free 1.