Command 20; Command 50 - Honeywell SS4-A HART User Manual

3.7 Command 8
Use command 8 to read Dynamic Variable Classification.
This command is not application flame sensors, however the FSCHCOM will
reply as following:
Response to command 8:
Byte Format
0 Code
1 Code
2 Code
3 Code
3.8 Command 12
Use command 12 to read the message contained within the FSCHCOM module.
Response to command 12:
Byte Format
0 to 23 Packed
ASCII
3.9 Command 13
Use command 13 to read Tag, Descriptor, Date of release.
Response to command 13:
Byte Format
0 to 5 Packed
string
6 to 15 Packed
string
18-20 Date
3.10 Command 14
Use command 14 to Primary variable transducer information.
Description
0 for undefined code
0 for undefined code
0 for undefined code
0 for undefined code
Description
Alpha numeric message
Description
TAG
Description
Date of firmware release
Page 9 of 14