Replacing Bulbs; High-Beam Headlamps - Mercedes-Benz E-Class Operator's Manual

Sedan and wagon
Hide thumbs Also See for E-Class:
Table of Contents

Advertisement

Only operate bulbs in enclosed lamps
designed for that purpose. Only install spare
bulbs of the same type and the specified volt-
age.
Marks on the glass tube reduce the service
life of the bulbs. Do not touch the glass tube
with your bare hands. If necessary, clean the
glass tube when cold with alcohol or spirit and
rub it off with a lint-free cloth.
Protect bulbs from moisture during opera-
tion. Do not allow bulbs to come into contact
with liquids.
Replace only the bulbs listed (
Have the bulbs that you cannot replace your-
self changed at a qualified specialist work-
shop.
If you require assistance changing bulbs, con-
sult a qualified specialist workshop.
If the new bulb still does not light up, consult
a qualified specialist workshop.
Bulbs and lamps are an important aspect of
vehicle safety. You must therefore make sure
that these function correctly at all times.
Have the headlamp setting checked regularly.
Vehicles with static LED headlamps
The front and rear light clusters of your vehi-
cle are equipped with LED light bulbs. Do not
replace the bulbs yourself. Contact a qualified
specialist workshop which has the necessary
specialist knowledge and tools to carry out
the work required.
Lamps are an important aspect of vehicle
safety. You must therefore make sure that
these function correctly at all times. Have the
headlamp setting checked regularly.
Overview: changing bulbs/bulb types
You can change the following bulbs. The bulb
type can be found in the legend.
Static LED headlamps
:
page 135).
Y
;
Changing the front bulbs
High-beam headlamps (static LED head-
lamps)
Switch off the lights.
X
Open the hood.
X
Turn housing cover : counter-clockwise
X
and pull it out.
Using the handle extension, turn bulb
X
holder ; counter-clockwise and pull it out.
Take the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ; into the lamp and turn
X
it clockwise.
Align housing cover : and turn it clock-
X
wise until it engages.

Replacing bulbs

High-beam headlamp: H7 55 W
Turn signal lamp: PSY 24 W
135
Z

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents