Motor Antenna Configuration - Helios RX-7 Operation Manual

c. Frequency
You can input the frequecy by using the numeric keys or by using the arrow keys.
d. Symbol Rate
You can input the symbol rate by using the numeric keys or by using the arrow keys.
e. Polarisation
Here you can select the polarisation of the transponder by using the arrow keys
f. FEC
Use the arrow keys for selection of FEC. Recommendable is the use of AUTO.
g. Save
Stores your actual settings.
h. Scan
Sarts scanning of the selected transponder for channels.
i. New
Here you can add a new transponder.
j. PID
Allows the search of a specific channel if you know the actual PID's.

4. Motor antenna configuration

If using a DiSEqC 1.2 motor, you can store
the position of the satellite in following
menu. Select the desired satellite and a
transponder.
a. Continously move
Using the arrow keys
antenna. Right arrow key to the west, left
arrow key to the east. Pressing OK stops the
motor.
b. Move steps
Every time you press the arrow keys the
motor moves stepwise east or west.
c. Step size
Here you can set the size of the turning
d. Limit set
Set limits here in order to avoid the motor trying to drive beyond ist full arc of movement.
e. Reference position
Drives motor automatically back into the 0° reference position.
f. (Reset) Calculation
Calculates newly the positions.
you can turn the
- UK 10 -
.
English