Fortinet FortiMail-100 Quick Start Manual

LED State
On
Power
Off
Status On
On
100/1000
Off
Flashing
Link Act
On
For more information
• Documentation CD: all major FortiMail documents
• Fortinet Technical Documentation:
• Fortinet Knowledge Base:
• Fortinet Technical Support:
• Fortinet Training Service:
Package Contents
Orange - Crossover
Grey - Straight-through
Connector Type
Port 1 to 4 RJ-45
CONSOLE DB-9
Installation Overview
Installation and configuration of the FortiMail unit involves the
following steps:
1. Place the unit on a stable surface.
2. Connecting the unit to the network. For details, see the
FortiMail Install Guide.
3. Powering up the unit. See instructions below.
4. Connecting to the web-based manager. See instructions
below.
5. Selecting an operation mode: Gateway, Transparent, or
Server. For details, see the FortiMail Install Guide.
Collecting Information
Interface settings
IP:
Port 1:
Netmask:
IP:
Port 2
Netmask:
IP:
Port 3:
Netmask:
IP:
Port 4
Netmask:
Transparent
Management IP:
mode
Description
The FortiMail unit is on.
The FortiMail unit is off.
The FortiMail unit is running
normally.
Port connected at up to 100 Mbps.
Port connected at 10 Mbps.
Network activities on the FortiMail
unit.
Port connected.
http://docs.fortinet.com
http://kb.fortinet.com
http://support.fortinet.com
http://campus.training.fortinet.com
Front
1 2 3
POWER
STATUS
Power LED
Interface
Status LED
status LEDs
Ethernet Cables:
Power Cable Power Supply
Speed
10/100Base-T
9600 bps
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
QuickStart Guide
© Copyright 2010 Fortinet Incorporated. All rights reserved.
Trademarks
Products mentioned in this document are trademarks or registered
trademarks of their respective holders.
Regulatory Compliance
FCC Class A Part 15, CE, and UL
Version 4.0
9 February 2010
http://www.fortinet.com
DC+12V
4
10/100
LINK / ACT
Power
Connection
RS-232 Serial
Connection
Null-Modem Cable
(RS-232)
Protocol Description
Ethernet Connection to the network.
RS-232 serial Connection to the management computer.
Provides access to the command line interface (CLI).
6. Running the QuickStart wizard to configure the basic settings.
For details, see the FortiMail Install Guide.
7. For all other installation instructions, see the FortiMail Install
Guide on the documentation CD.
8. For all the configuration instructions, see the FortiMail
Administration Guide and the FortiMail online help.
9. If you want to use the CLI commands to configure the unit, see
the FortiMail CLI Reference on the documentation CD.
General settings
Administrator
password:
Network
Settings:
Factory default settings
Default mode
Administrator
account on Port 1
Management
Access
POWER
STATUS
Back
USB
4 3 2 1
USB
(future)
Internal Interface,
switch connectors
1,2,3,4
QuickStart Guide
FortiGate-30B
400B USB CONSOLE 1 2 3 4
ools and Documenation
Copyright 2008 Fortinet Incorporated. All rights reserved.
Trademarks
Welcome | Bienvenue | Willkommen | | Bienvenido | Benvenuto
Documentation
Default Gateway:
____.____.____.____
Primary DNS Server:
____.____.____.____
Secondary DNS Server: ____.____.____.____
Gateway mode
User name/ admin/(No password)
Password:
Web-based https://192.168.1.99/admin
manager URL:
HTTPS, Ping, SSH
FortiMail-100
1 2 3 4
10/100
LINK / ACT