Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Soundmask SM-DX-4800
Summary of Contents for Soundmask SM-DX-4800
- Page 1 OPERATING MANUAL DIGITAL DISTRIBUTOR MODEL SM-DX-4800 www.soundmask.com.au...
-
Page 2: Important Safety Information
The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. PROTECT THE POWER CORD FROM BEING WALKED ON OR PINCHED PARTICULARLY AT www.soundmask.com.au... - Page 3 The SM-DX-4800 can be controlled or configured in real time on the front panel or with the intuitive PC GUI accessed via the USB or RS485. Multiple setup storage and system security complete this professional package. Copyright © 2015 Soundmask Australia Pty Ltd. All Rights Reserved.
-
Page 4: Specifications
SPECIFICATIONS Note: Specifications subject to change without notice Model SM-DX-4800 Inputs and Outputs Input Impedance: >10k Ohms Output Impedance: 50 Ohms Maximum Level: +20dBu Type: Electronically balanced Audio Performance Frequency Response: +/- 0.1dB (20 to 20 kHz) Dynamic Range: 115dB type (unweighted) CMMR: >... -
Page 5: User Interface
100X. To confirm the setting push the wheel one time. LCD – 4 line x 32 characters displays all the necessary information to control the unit. Cursor control – 4 key for Cursor control. Copyright © 2015 Soundmask Australia Pty Ltd. All Rights Reserved. -
Page 6: Dimensional Diagram
Mute key is still pressed. program name assigned to the unit. If the 2 fields are empty, it means that no program is assigned, the last data before the previous power down is recalled instead. › Now the SM-DX-4800 is ready to operate. www.soundmask.com.au... -
Page 7: Input Menus
› FTRH – Filter Type of low frequency crossover point Name – Channel Name (high pass). Types can be Butterworth, Linkritz Riley › Name – Channel name. It is 6 characters in length. or Bessel. OUT 1:XXXXXX MENU:Name NAME:XXXXXX Copyright © 2015 Soundmask Australia Pty Ltd. All Rights Reserved. -
Page 8: System Menus
The password of the DX is 6 characters in length. SYSTEM SETUP MENU: Password Load a Xover – Program Recall *------* The SM-DX-4800 has a built in non-volatile memory *0 * that can store up to 30 different program setups. A *------* program can be recalled using this menu. - Page 9 The user can change it via the PC application software. The factory default of a new unit does not require a password. *Password ↓ SYSTEM SETUP MENU: Password *------* *0 * *------* Copyright © 2015 Soundmask Australia Pty Ltd. All Rights Reserved.
-
Page 10: Quick Reference
QUICK REFERENCE PC CONTROL SOFTWARE Parameters Menu The SM-DX-4800 series is shipped with special PC Control Software which gives the user an option <<Menu>> to control the unit from a remote PC via the USB Field or RS485 serial communication link. The software makes it much easier to control and monitor the <<Cursor>>... - Page 11 DIGITAL AMPLIFIER SM-DA-8000 CEILING TRANSDUCER SM-T-1200 › Each SM-T-1200 pictured represents 100 transducers. NOTES › The SM-DA-8000 is capable of servicing up to 800 transducers. › Diagram not to scale. Copyright © 2015 Soundmask Australia Pty Ltd. All Rights Reserved.
-
Page 12: Troubleshooting
To the best of our knowledge, the material contained within this document was accurate at the time of printing. No liability or otherwise is assumed for the accuracy of this document. No warranty is given or implied as to the accuracy of any part of the document. Copyright © 2015 Soundmask Australia Pty Ltd. All Rights Reserved.
Need help?
Do you have a question about the SM-DX-4800 and is the answer not in the manual?
Questions and answers