Table of Contents
Advertisement
MENU SYSTEM
Use the four buttons under the LED display on the back to set the mode in which the light
will operate. The buttons perform the following functions:
MENU: Accesses the menu system or backs out of editing an entry.
UP: Selects the previous mode or increases the value of the selected mode.
DOWN: Selects the next mode or decreases the value of the selected mode.
ENTER: Selects the currently displayed mode for editing or accepts the edited value.
The following table shows the eight menu options, their possible values, and what they
mean.
Entry
Values
Addr
d001-d512
LEd
on/oFF
UL-
U.000-U.255
FLAS
FL00-FL15
FAdE
FA00-FA15
SouF
So.uF
SLAU
SL.AU
CHnd
1/2/3/6CH
MASTER/SLAVE MODE
Whenever the light is set to a mode other than a DMX address or Slave mode, it is
considered to be in Master mode. For example, when set to the Sound Activated operation,
it is in a Master mode.
When the light is the Master, it will send DMX instructions to other connected lights. Those
other lights must be set to Slave mode (SLAU) to receive and execute the instructions sent
by the Master light.
DMX address
Turns the LEDs on/off
Dimming mode (fast to slow)
Strobe mode (fast to slow)
Fade mode (fast to slow)
Sound activated reaction mode
Slave mode
Selects the number of DMX channels to use
5
Remarks
Advertisement
Table of Contents
