Table of Contents
Advertisement
7
GAS LINE CONNECTION
WARNING: Only persons licensed to work with gas piping
may make the necessary gas connections to this appliance.
The appliance is provided with an opening on both
sides of the control compartment. A 3/8" gas supply pipe must
be brought near this inlet hole, from either the left or right
hand side. It is recommended that a union be provided inside
or close to the control compartment to facilitate easier
servicing.
NOTE: The gas line connection may be made using 3/8"
copper tubing or an approved flex connector. Since some
municipalities have additional local codes, it is always best to
consult your local authorities and the CAN/CGA-B 149 (1 or
2) Installation Code.
For U.S.A. gas installations follow either local codes or the current edition of the National
Fuel Gas Code ANZI.Z223.1
Advertisement
Table of Contents
