Connecting Up Your Digital Receiver; Connecting To The Antenna; Connecting To Your Television Set - Topfield SBF-5400 User Manual

2.4 Connecting up your digital receiver

2.4.1 Connecting to the antenna

2.4.2 Connecting to your television set

To use the Composite video output
NOTE
Perhaps you are expecting that the satellite antenna could
simultaneously catch all frequencies coming from a satellite
and send them to the digital receiver. However, the satellite
antenna only sends the frequencies that it can catch with the
LNB frequency and polarisation specified by the digital re-
ceiver. So if you have another digital receiver linked from
the LNB OUT connector, you can only use it limitedly. See
§3.1 for more details.
You should configure audio and video settings after connect-
ing up the digital receiver. See
2.4 Connecting up your digital receiver 9
Whatever sort of connection you have be-
tween the digital receiver and the television,
you need to connect the digital receiver to the
antenna so that it can receive digital televi-
sion broadcasts. Connect the antenna cable
to the LNB IN connector.
§4.2
You need to obtain a Composite video cable
(RCA cable) to use the Composite video out-
put. Plug one end of the cable into the VIDEO
(yellow) socket on the digital receiver, and
plug the other end into the matching socket
on your television.
for a detailed description.