⃝ VIDEO
3
⃝ AUDIO L/R
4
⃝ RF IN
5
⃝ RF OUT
6
⃝ RS232
7
Table 2.3: Connectors specification
AV RCA
RS-232
2.4 Connecting the digital receiver
There are several ways to install the digital receiver as de-
scribed below. Install the digital receiver suitably to your tele-
vision and other appliances. If you have any problem with
your installation or need a help, contact your dealer or service
provider.
You should configure audio and video settings after installa-
tion. For detailed descriptions about audio and video settings,
refer to § 3.2.
Connecting to the satellite antenna
Connect the antenna cable to the LNB IN socket on the digi-
tal receiver. If you have another digital receiver, plug another
cable into the LNB OUT socket on the digital receiver and the
corresponding socket on the other digital receiver.
2.4 Connecting the digital receiver
Composite video output socket for television
or AV receiver.
Stereo audio output socket for television or
audio appliance.
Terrestrial broadcast input socket from con-
ventional aerial antenna.
AV output socket for television.
Serial port for firmware update and data trans-
fer
CVBS video output
Audio L/R output
9 pin D-sub type
Transfer rate : Max. 115.2 kbps
9