LG Music Flow NP8340 (H3) Owner's Manual page 13

1. Plug the speaker into an electrical outlet. The
Network status LED starts to blink white.
2. On your smart device, launch Music Flow Player
app. Select [Start] to install the speaker.
3. Check the Network status LED on the
speaker and select [Next] to go to the next
screen.
4. Select [Wired connection] on the screen.
5. Connect one end of the LAN cable to the
speaker's ETHERNET port and connect the other
end to your wireless router.
Wait a moment until
stops blinking and stays white.
6. Then select [Next] on the screen.
Connecting 13
Network status LED
2