D-Link DSL-560I User Manual page 29

2 Select the Encapsulation method used for your connection. The options available are RFC1483Bridged,
RFC1483Routed, PPPoE, and PPPoA. The default Encapsulation is RFC1483 Bridged.
3 The remaining settings that must be configured are different for the different Encapsulations.
3.1 If you have selected a PPPoE or PPPoA Encapsulation you must supply a User Name and Password
used to verify the identity of your account. Type in the User Name and Password used for your PPP
connection. Also select the Authentication method used, pap or chap, choose Enabled for Connect On
Demand and leave the Idle Time setting at 0.
3.2 If you have selected a Bridge Encapsulation, there is no more change needed to establish the WAN
connection for the Router. However, you will probably have to install some sort of connection software
on your computer. Go to step 6 and finalize the Router configuration, then install any additional
software. Follow the instructions given to you by your ISP or network service provider.
4 Click the Add button when you have entered all the information. The web browser will briefly go blank.
After a few seconds the PVC profile listed in the Current ATM PVC List at the bottom of the web page will
show the changes that you have just configured.
DSL-560I ADSL Router User's Guide
19