Valco baby TRAVEL SYSTEM ADAPTOR Product Reference Manual

Download this manual

PRODUCT REFERENCE GUIDE

Thank you for purchasing a quality Valco Baby product. Please read and follow the instructions outlined in this

guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all

the warnings and safety guidelines before use.

Important: Please read the following instructions carefully before assembling this product. Retain this

guide in a safe place for future reference.

FURTHER INFORMATION

In Australia/New

Zealandwww.valco.com.au

ADAPTOR

In North America only

www.valcobaby.com

1800 610 7850

TRAVEL

SYSTEM

FOR ION FOR 2

Due to our policy of continuous product

development, this product is constantly

evolving. It is possible that some

features or procedures outlined here

have changed since this document

was written. If you are unsure of any

procedure shown here, please contact

us via the web at info@valco.com.au to

obtain the most up to date information

before use. Include the batch number,

which can be found on a sticker on the

frame.

All pictures and diagrams herein are

provided for illustration purposes only.

Actual product, colour or fabric may

vary. Valco Baby reserves the right to

modify or alter any specification or colour

without notice or obligation to modify any

product previously purchased

Page 1 FOR ION FOR 2 PRODUCT REFERENCE GUIDE Thank you for purchasing a quality Valco Baby product. Please read and follow the instructions outlined in this guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all the warnings and safety guidelines before use.
Page 2 aDaPTOR aSSEMBLY FIGURE A 1. Remove the Car Seat Adaptor from packaging. Dispose of all packaging thoughtfully. Identify all parts on the Adaptor: a. Adaptor Fixing brackets b. Front locking hooks c. Back locking uprights FIGURE B 2. The Valco Travel System is made to accommodate the Britax Unitiy™...
Page 3 FIGURE E 8. Push down on the seat firmly until you feel the rear locking uprights click into place. IMPORTaNT NOTE: aLWaYS TEST THaT THE SEaT IS SECURELY ENGaGED BY PULLING UP ON IT SLIGHTLY FIGURE F - REMOVING THE SEAT 9.
Page 4 WARNING • FOLLOW THE MANUFACTURER’S INSTRUCTIONS. • PUT ON ALL THE BRAKES WHENEVER YOU PARK THE PRAM/STROLLER. • DO NOT LEAVE CHILDREN UNATTENDED. • DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS PRAM/STROLLER. • MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS IF YOU ADJUST THE PRAM/STROLLER. OTHERWISE THEY MAY BE INJURED.