Valco baby Twin Latitude Car Seat Adapter Reference Manual

Twin latitude car seat adapter compatible with most maxi cosi car seats

Download this manual

PRODUCT REFERENCE GUIDE

Thank you for purchasing a quality VALCO product. Please read and follow the instructions outlined in this

guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all

the warnings and safety guidelines before use. This product is for use with the VALCO Latitude stroller in North

American only. This product is not intended for use in Australia.

Important: Please read the following instructions carefully before assembling this product. Retain this

guide in a safe place for future reference.

FURTHER INFORMATION

North America only

www.valcobaby.com

1800 610 7850

Twin Latitude Car

Seat Adapter

Compatible with most Maxi Cosi Car Seats

Due to our policy of continuous

product development, this

product is constantly evolving. It

is possible that some features or

procedures outlined here have

changed since this document

was written. If you are unsure

of any procedure shown here,

please contact us via the web at

info@valcobaby.com to obtain

the most up to date information

before use. Include the batch

number, which can be found on a

sticker on the frame.

All pictures and diagrams herein

are provided for illustration

purposes only. Actual product,

colour or fabric may vary. VALCO

reserves the right to modify or

alter any specification or colour

without notice or obligation to

modify any product previously

purchased

Page 1 Twin Latitude Car Seat Adapter Compatible with most Maxi Cosi Car Seats PRODUCT REFERENCE GUIDE Thank you for purchasing a quality VALCO product. Please read and follow the instructions outlined in this guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all the warnings and safety guidelines before use.
Page 2 INsTALLINg yOUR TwIN MAXI COsI CAR sEAT ADAPTOR: Bumper Bar Seat Reclined Hood FIgURE A 1. Begin preparing the Latitude stroller for the Maxi Cosi Strap Car seat Adaptor by removing the canopy (hoods) Male Buckle from the stroller and reclining the seats to their fully reclined position (detailed instructions in the Twin Latitude stroller Instruction Manual).
Page 3 FIgURE E 10. slip the strap through the ‘opening’ of the metal loop at the end of the strap. 11. Once strap is through the metal loop, pull plastic end up to tighten, and secure on stroller. Loop through 12. Repeat the process outlined in Figures C to E Pull up to tighten to attach the remaining strap to the middle bar of the stroller.
Page 4 FIgURE I 19. Once strap is tightly wrapped, pull the Female clip over the front hook 20. Place Male clip under the front bumper bar 21. Insert the Male clip into the Female clip and buckle 22. Adjust strap to tighten. FIgURE J 15.