Sample Functions - IBM 5100 Communications Manual

Sample Functions
The following routines are an example of how you can transmit variables from a
remote APL.SV system to the 5100 tape. The b.b.ATTR and b.b.SEND routines
should be keyed into a workspace on the remote system, and the b.b.RECEIVE
routine should be keyed into the 5100 workspace. The functions to be
transmitted must be converted to variables using
0
CR.
Follow this procedure:
1. Using the) LOAD command, load the remote system with the sending routine
and the variables to be sent.
2. Insert the tape cartridge in the 5100 tape unit.
3. Enter the following:
~OUTSEL
SYS
~OPEN
OUT file number
b.b.SEND 'variable name' (for each function to be sent)
~CLOSE
r~J
LE40
4. Return the 5100 to normal APL operation.
5. Using the) LOAD command, load the 5100 workspace with the b.b. RECEIVE
function.
6. Execute the function b.b.RECEIVE.
Appendix B. Sample Tape Communications and Programs 37