Advertisement
INSTRUCTION MANUAL
Magna-Spot
*
WARNING:
*
To reduce the risk of serious injury and/or property
damage, observe all warnings and instructions while
operating the welder. Keep work area clean and well lit.
Maintain tool in top condition and obtain service from
manufacturer if tool malfunctions. Use only accessories
and replacement parts that are provided by the
manufacturer.
To reduce the risk of electrical shock: Do not expose
+
welder to rain or wet conditions. Water entering tool will
increase the risk of electrical shock. Unplug welder when
not in use. Do not operate welder with any portion of the
housing removed. Disconnect welder from power supply
before servicing any part of the welder. Failure to follow
these instructions will increase the risk of electrical shock.
+
Do not abuse power cord. Never use the power cord for
carrying, pulling or unplugging the welder. Keep power
cord away from heat, sharp edges and moving parts.
Replace power cord immediately if it becomes damaged.
Damaged cords increase the risk of electrical shock.
IF YOU HAVE ANY QUESTIONS ABOUT THE OPERATION OF PRODUCT CALL TOLL FREE
Models JO1000, JO1500, JO2000
Read and understand all instructions before attempting to operate tool.
Failure to follow instructions may result in electric shock, fire and/or serious personal injury.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
8:00 am to 5:00 pm - Pacific Time - Monday through Friday
Studwelder
®
8
This welder must be connected to a properly
grounded outlet installed in accordance with all local
codes and ordinances. Never remove the grounding
prong or modify the plug in any way. Do not use adapter
plugs. Consult an electrician if you are in any doubt as to
whether the plug is properly grounded. Avoid bodily
contact with grounded surfaces.
Do not operate tool in explosive atmospheres, such
!
as in the presence of flammable liquids, gases or dust.
Welders create sparks which may ignite dust or fumes.
Use in well ventilated areas only. Welders generate heat
which can ignite surrounding materials causing fires. Do
not use welder on body panels containing insulating
material which may be ignited by the heat.
O
Always wear proper personal protection when
operating welder. Proper eye protection is required to
reduce the risk of eye injury from sparks and molten
metal. Adequate gloves and clothing are required to
A
reduce the risk of burns. Allow parts to cool before
handling.
800-227-2822
Advertisement
Related Manuals for Motor Guard Magna-Spot JO1000
Summary of Contents for Motor Guard Magna-Spot JO1000
- Page 1 INSTRUCTION MANUAL Magna-Spot Studwelder ® Models JO1000, JO1500, JO2000 WARNING: Read and understand all instructions before attempting to operate tool. Failure to follow instructions may result in electric shock, fire and/or serious personal injury. IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of serious injury and/or property This welder must be connected to a properly damage, observe all warnings and instructions while grounded outlet installed in accordance with all local...
-
Page 2: Preparing Tool For Use/Welding
PREPARING TOOL FOR USE Read and understand all warnings and instructions prior to use. For 120V operation in the US and Canada, a three prong plug is provided. For units rated at 240V, a field supplied, approved plug must be installed by the user. -
Page 3: Maintenance
MAINTENANCE Disconnect welder from power source and allow all parts to cool before performing service or repair. Inspect power cord at each use for signs of wear or damage. Do not operate welder if wear or breaks in insulation or wire are present. Obtain repair service for damaged power cord. -
Page 4: Replacement Parts
Motor Guard Corporation assumes the responsibility of providing products that are free from defects in workmanship and material. Should a product fail due to a defect in workmanship or material, Motor Guard Corporation will repair or, at its option, replace the product without charge, other than the transportation charges, provided that the product is returned to the factory, transportation prepaid, within Five (5) Years of the date of purchase.
Need help?
Do you have a question about the Magna-Spot JO1000 and is the answer not in the manual?
Questions and answers