Numatic NSP 180A Owner's Instructions Manual page 8

● Keep your machine clean.
● Keep filters clean.
● Use filter bags, they will enhance performance and help keep machine clean.
● Use a Numatic Original filter bag under fine dust conditions.
● Keep hoses and tubes clear.
● Replace any worn or damaged parts immediately.
● Regularly examine the power cord. If damage is found such as cracking or ageing the power
cord must be replaced by a qualified person using the correct Numatic original part.
● Change dust bag frequently.
● Keep diffuser filter (where fitted) clean.
● Only use the brushes provided with the machine. The use of other brushes may impair safety.
● Unreel the cable with one pull or pull on the cable to unplug the machine from the power supply.
● Use to suck up hot ashes, lighted cigarette ends or flammable gases.
● Use steam cleaners, pressure washers or immerse in water to clean the machine.
● Attempt machine maintenance or cleaning unless the power supply plug has been removed from the
supply outlet.
● Use in a wet environment or to collect wet materials.
● Store your machine in wet conditions.
Data
180A
200A
Size Range
180A
200A
Failure to rectify any problem or in the event of a
breakdown contact your Numatic dealer or the
Numatic Technical helpline +44 (0)1460 269268
Motor
Hi - 800W
Lo - 500W
Capacity
9L
Cleaning Range
26.8 m
233816 0512 (A03)
Airflow
Hi - 30 l/sec
Size
340x340x350 mm
355x355x430 mm
Sound Pressure
66 - 69 dB (A)
(IEC 60704-2-1)
Uncertainty 0.2 dB
Suction
Hi - 2000mm .w.g.
Lo - 1300mm .w.g.
Weight
5.8Kg
6.1Kg
Protection Class
Class II