Advertisement
GENERAL CARE AND MAINTENANCE INFORMATION
The following guidelines are recommended for you to obtain maximum efficiency from your water treatment system:
Control Valve...
Try to keep free of dirt and debris both on valve body and under cover. No lubrica on is required.
Brine Tank ...
A major cleaning is recommended every two years. This interval may need to be adjusted depending on the
amount of insoluble material in the salt being used.
Allow salt level to become very low so there is li le to remove. Scoop out un‐dissolved salt.
Disconnect and remove brine valve. There is no pressure or suc on on this line except during a regenera on.
Remove internal parts of brine tank, if any.
Clean brine tank interior with a mild cleaning agent (dish soap) and rinse thoroughly.
Replace brine valve and internal parts.
Pour five gallons of water (so ened if available) into the tank (Add only two gallons if pre‐brine refill op on is used).
Add salt.
Replace cover.
Allow two hours for concentrated brine to be made before next regenera on.
It is recommended that... a manually ini ated regenera on should be started now. See Manual Regenera on.
Advertisement
