1. Manuals
  2. Brands
  3. Crypto Manuals
  4. Wireless Router
  5. WF250
  6. User manual

Crypto WF250 User Manual

11n wireless 150mbps adsl2/2+ modem router
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
W
F
2
5
0
W
F
2
5
0
11n Wireless 150Mbps ADSL2/2+ Modem Router
U
s
e
r
M
a
n
u
a
l
U
s
e
r
M
a
n
u
a
l
Version 1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WF250 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Crypto WF250

Summary of Contents for Crypto WF250

  • Page 1 11n Wireless 150Mbps ADSL2/2+ Modem Router Version 1.0...

  • Page 2: Table Of Contents

    2.3 Front Panel Indicators and Description............... 7 2.4 Back Panel ......................8 2.5 Connect Related Devices ..................9 3. Connecting the WF250 ADSL 2/2+ Router via Ethernet......... 9 3.1 Setup Wireless ADSL 2/2+ router via Ethernet Cable........10 3.2 Configure TCP/IP ..................... 10 4 Configure the WF250 ADSL2+ Router via HTML..........
  • Page 3 WF250 802.11n Wireless ADSL Modem Router 6.2.9 DNS.....................38 6.2.10 DSL ....................39 6.2.11 UPNP ....................39 6.2.12 DNS Proxy ..................39 6.2.13 Interface Grouping ................39 6.2.14 IPSec ....................39 6.2.15 Certificate..................39 6.2.16 Multicast ...................39 6.3 Wireless......................40 6.3.1 Basic....................40 6.3.2 Security ..................41 6.3.3 Mac Filter..................44 6.3.4...

  • Page 4: Introduction

    WF250 802.11n Wireless ADSL Modem Router 1. Introduction 1.1 Introduction This full rate Wireless ADSL2/2+ router is an all-in-one gateway for Home and SOHO applications. This gateway is with full-featured ADSL router that provides high-speed Internet access, 4-port Ethernet switch...
  • Page 5 WF250 802.11n Wireless ADSL Modem Router ITU G.992.1 (G.DMT) ITU G.992.2 (G.Lite) ITU G.994.1 (G.hs) ITU G.992.3 (G.DMT.BIS) ITU G.992.4 (G.lite.bis) ITU G.992.5 Compatible with all T1.413 issue 2 (full rate DMT over analog POTS), and CO DSLAM equipment TR-069 compliant with ACS...
  • Page 6 WF250 802.11n Wireless ADSL Modem Router DHCP Support DHCP (Dynamic Host Configuration Protocol) allows individual clients to obtain TCP/IP configuration at start-up from a centralized DHCP server. The ADSL router has built-in DHCP server capability enabled by default. It can assign IP addresses, an IP default gateway and DNS servers to DHCP clients.

  • Page 7: Hardware Installation

    WF250 802.11n Wireless ADSL Modem Router VPN (IPSec, PPTP, L2TP) pass through Built-in NAT Firewall IP-based Packet filtering Password Protected System Management Parental control Factory Defaults The device is configured with the following factory defaults: Router User Name :admin Router Password: adslroot IP Address: 192.168.1.1...

  • Page 8: Back Panel

    WF250 802.11n Wireless ADSL Modem Router Descriptions of LED status Color Function On: Power on Green Off: No power On: System boot failed or CFE mode On: LAN link established and active via LAN port ETH1-4 Green Blinking: ADSL data activity occurs...

  • Page 9: Connect Related Devices

    3. Connecting the WF250 ADSL 2/2+ Router via Ethernet Your router can be managed from anywhere with the embedded Web configuration using a Web browser, such as Microsoft Internet Explorer 6.0...

  • Page 10: Setup Wireless Adsl 2/2+ Router Via Ethernet Cable

    WF250 802.11n Wireless ADSL Modem Router 3.1 Setup Wireless ADSL 2/2+ router via Ethernet Cable If there is an available LAN card present on your PC, you just simply connect ADSL router and PC through the Ethernet cable. Once you establish Internet connection, you could browse the Web through the Ethernet cable.
  • Page 11 WF250 802.11n Wireless ADSL Modem Router Step 4: Select Internet Protocol (TCP/IP) then click Properties: Configure IP address Automatically: Step 5: Select Obtain an IP address automatically and Obtain DNS server address automatically. Click OK to finish the configuration.
  • Page 12 WF250 802.11n Wireless ADSL Modem Router Configure IP Address Manually: Step 5: Select Use the following IP address and Use the following DNS server addresses. IP address: Fill in IP address 192.168.1.x (x is a number between 2 to 254).
  • Page 13 WF250 802.11n Wireless ADSL Modem Router You can use ping command under DOS prompt to check if you have setup TCP/IP protocol correctly and if your computer has successfully connected to this router. 1) Type ping 192.168.1.1 under DOS prompt and the following messages will appear: Pinging 192.168.1.1 with 32 bytes of data:...
  • Page 14 WF250 802.11n Wireless ADSL Modem Router Step 2: Double-click Network and Sharing Center icon. Step 3: Select “Manage Network connections”.
  • Page 15 WF250 802.11n Wireless ADSL Modem Router Step 4: Right-click Local Area Connection (local network your ADSL hooked up with) and select Properties: Step 5: Select Internet Protocol (TCP/IP) then click Properties:...
  • Page 16 WF250 802.11n Wireless ADSL Modem Router Configure IP address Automatically: Step 6: Select Obtain an IP address automatically and Obtain DNS server address automatically. Click OK to finish the configuration. Configure IP Address Manually: Step 7: Select Use the following IP address and Use the following...

  • Page 17: Configure The Wf250 Adsl2+ Router Via Html

    Request timed out. This failure might be caused by cable issue or something wrong in configuration procedure. 4 Configure the WF250 ADSL2+ Router via HTML This device supports a Web-based (HTML) GUI to allow users to configure Router setting via Web browser.

  • Page 18: Navigating The Web Configurator

    WF250 802.11n Wireless ADSL Modem Router User Name and Password: The default login User Name of the administrator is admin, and the default login password is adslroot. 4.2 Navigating the Web Configurator Steps to navigate the Web configuration from the Site Map are summarized...
  • Page 19 WF250 802.11n Wireless ADSL Modem Router Click on Device Info to see router device information, and performance statistics. Click on Advanced Setup to configure internet ADSL and LAN functions, firewall settings, NAT settings and other advanced features. Click on Wireless to manage all wireless access options such as security and other wireless functions.

  • Page 20: Internet Setup

    WF250 802.11n Wireless ADSL Modem Router 5. Internet Setup The physical connections determine whether the router ports are local area network (LAN) ports or wide area network (WAN) ports. There are two kinds of IP networks. The local, private kind is the LAN network; the global, public kind is the WAN network.

  • Page 21: Atm Setup

    WF250 802.11n Wireless ADSL Modem Router 5.1.1 ATM Setup ATM settings are used to connect to your ISP. Your ISP provides VPI, VCI, settings to you. In this Device, you can totally setup 16 PVCs on different encapsulations if you apply 16 different virtual circuits from your ISP.
  • Page 22 WF250 802.11n Wireless ADSL Modem Router VPI: Virtual Path Identifier. The valid range for the VPI is 0 to 255. The default values are 0 / 35 respectively. VCI: Virtual Channel Identifier. The valid range for the VCI is 1 to 65635 (0 to 31 is reserved for local management of ATM traffic).

  • Page 23: Wan Setup

    WF250 802.11n Wireless ADSL Modem Router IP QoS: Enabling QoS for PVC improves performance for selected classes of applications. 5.1.2 WAN Setup 1. Click WAN Service from Advanced Setup. 2. Click Add to select a layer 2 interface(ATM Setting) for this service and then click Next Choose WAN service type.Just choose PPPoE for example here.
  • Page 24 WF250 802.11n Wireless ADSL Modem Router PPPoE service name can be blank unless your Internet Service Provider gives you a value to enter. Authentication method is default to auto. It is recommended that you leave the Authentication method in Auto. However, you may select PAP or CHAP if necessary.
  • Page 25 WF250 802.11n Wireless ADSL Modem Router The PPP IP Extension is a special feature deployed by some service providers. Unless your service provider specifically requires this setup, do not select it. If you need to select it, the PPP IP Extension supports the following conditions: It allows only one computer on the LAN.

  • Page 26: Router Mode Setup

    WF250 802.11n Wireless ADSL Modem Router 5. Get DNS server information from the selected WAN interface or enter static DNS server IP addresses. If only a single PVC with IPoA or static MER protocol is configured, you must enter static DNS server IP addresses.
  • Page 27 WF250 802.11n Wireless ADSL Modem Router 3. Select an ETH port as you will. You can select ENET1, ENET2, ENET3 or ENET4 port as the WAN interface and Default Mode as connection mode. 4. Click Apply/Save and you’ll see the following screen.
  • Page 28 WF250 802.11n Wireless ADSL Modem Router 7. Click Next and you’ll see the following screen. Select PPPoE as WAN service type for example. Click Next. 8. Enter the user name and password that your ISP has provided to you. Click...
  • Page 29 WF250 802.11n Wireless ADSL Modem Router PPPoE service name can be blank unless your Internet Service Provider gives you a value to enter. Authentication method is default to Auto. It is recommended that you leave the Authentication method in Auto, however, you may select PAP or CHAP if necessary.
  • Page 30 WF250 802.11n Wireless ADSL Modem Router The PPP IP Extension is a special feature deployed by some service providers. Unless your service provider specifically requires this setup, do not select it. If you need to select it, the PPP IP Extension supports the following conditions: •...
  • Page 31 WF250 802.11n Wireless ADSL Modem Router 9. Select WAN interface as the system default gateway. Click Next. 10. Get DNS server information from the selected WAN interface or enter static DNS server IP addresses. Click Next. 11. Make sure that the settings above match the settings provided by your ISP.

  • Page 32: Lan

    WF250 802.11n Wireless ADSL Modem Router 5.2 LAN There are the IP settings of the LAN Interface for the device. These settings may be referred to as Private settings. You may change the LAN IP address if needed. The LAN IP address is provided to your internal network and cannot be seen on the Internet.
  • Page 33 WF250 802.11n Wireless ADSL Modem Router Start / end IP This is the beginning and ending range for the DHCP address server addresses. The amount of time before the IP address is refreshed by Leased time the DHCP server. Select this option to let the device use a second IP address Configure the on the LAN interface.

  • Page 34: Menu Description

    6.1 Device Info This menu with all its submenus provides important information on the status of your WF250, the ADSL connection with your ISP and your LAN. 6.1.1 Summary All the parameters shown in this page are the factory default settings. You can...

  • Page 35: Advance Setup

    WF250 802.11n Wireless ADSL Modem Router 6.2 Advance Setup Through the advanced setup you can configure your ADSL connection, use all the available features of the F360 and fine tune the performance of your network. 6.2.1 Layer2 Interface From the Layer2 interface menu you can configure the ATM interface as long as the ETH interfaces.

  • Page 36: Nat

    NAT and access the data or applications in a specific LAN client of the WF250. Click ‘Add” to add a new rule. If you want to delete an existing rule, tick the box on the “Remove” column and press “Remove”.
  • Page 37 WF250 802.11n Wireless ADSL Modem Router • Remote Access When the firewall is enabled on a WAN or LAN interface, all incoming IP traffic is BLOCKED. However, some IP traffic can be ACCEPTED by setting up filters. 1. Select Advanced Setup=>Security=>IP Filtering=>Incoming and Choose Add or Remove to configure incoming IP filters.

  • Page 38: Parental Control

    WF250 802.11n Wireless ADSL Modem Router 6.2.6 Parental Control The Parental Control is a unique feature of the WF250. You can restrict the access of a specific LAN client to the Internet. You can even arrange this blocking to be scheduled on a daily basis. Click ‘Add” to add a new rule. If you want to delete an existing rule, tick the box on the “Remove”...

  • Page 39: Dsl

    WF250 802.11n Wireless ADSL Modem Router 6.2.10 DSL The ADSL modem can be configured to fit the needs of any kind of ADSL link. 6.2.11 UPNP From this menu you can enable the UPNP service. Universal Plug and Play is a standard that uses Internet and Web protocols to...

  • Page 40: Wireless

    WF250 802.11n Wireless ADSL Modem Router 6.3 Wireless 6.3.1 Basic Option Description Enable A check box that enables or disables the wireless LAN interfaces. The wireless default is to enable wireless communications. Select Hide Access Point to protect the ADSL route access point from detection by wireless active scans.

  • Page 41: Security

    WF250 802.11n Wireless ADSL Modem Router name (SSID) Set Identifier. This name must be between 1 and 32 characters long. The default name is WLAN.All wireless clients must either detect the gateway or be configured with the correct SSID to access the Internet.
  • Page 42 5. Set WPS AP mode as configured and click Save/Apply. 6. Now you can use a wireless adaptor with WPS function and the WPS button to connect WF250 to access the Internet. 7. To configure security features for the Wireless interface, please open Security item from Wireless menu.
  • Page 43 WF250 802.11n Wireless ADSL Modem Router There are several security methods to choose from, depending on user’s needs and the capabilities of user’s wireless machines. WEP open and WEP shared —WEP is an encryption scheme that is used to protect user’s wireless data communications. WEP uses a combination of 64-bit keys or 128-bit keys to provide access control to user’s network...

  • Page 44: Mac Filter

    WF250 802.11n Wireless ADSL Modem Router WPA2 — WPA2 is a more advanced encryption method than WPA. Because it is a more recent standard, some of user’s wireless devices might not be able to use it. WPA2 (PSK) — This option uses WPA2 with a pre-shared key.

  • Page 45: Advanced Settings

    WF250 802.11n Wireless ADSL Modem Router 6.3.5 Advanced Settings This page is where user specifies a number of advanced settings for wireless communications. Note: After making any changes, click Apply to save. Warning: The settings shown above are default settings. Changes made to these items can cause wireless communication problems.
  • Page 46 WF250 802.11n Wireless ADSL Modem Router This drop-down list lets user specify the wireless communication rate for multicast packets, which are sent to more than one Multicast rate destination at a time. The value can be Auto (uses the highest rate when possible, or else a lower rate) or a fixed rate between 1 and 54 Mbps.

  • Page 47: Station Info

    WF250 802.11n Wireless ADSL Modem Router 6.3.6 Station Info This page shows authenticated wireless stations and their status.

  • Page 48: Diagnostics

    Refer to section 5.3 for more information 6.4 Diagnostics Select “Diagnostics” from the menu to display the diagnostics page. WF250 will perform diagnostics tests to your local connections (Ethernet connection to PC etc) and the connection to your ISP. Results (PASS, FAIL) will be displayed.

  • Page 49: Settings

    WF250 802.11n Wireless ADSL Modem Router • TR-069 client • allow or restrict access to individual users, • update the WF250 with new firmware and reboot the WF250. 6.5.1 Settings • Backup Settings: Select “Settings Backup” to enter the Backup Page.

  • Page 50: Tr-069 Client

    WF250 802.11n Wireless ADSL Modem Router SNMP Agent You can select the checkbox to disable or enable the function. Note: SNMP Community string provides a simple method of authentication between the Router (SNMP Agent) and a remote network manager (SNMP Manager).
  • Page 51 WF250 802.11n Wireless ADSL Modem Router time the configuration of this equipment became more complicated -- too complicated for the end-users. For this reason the TR-069 standard was developed. It provides the possibility of auto configuration of these access types. The technical specifications are managed and published by the Forum.

  • Page 52: Internet Time

    LAN, or from your local network to external network. You can specify and change the passwords for the three available user accounts (admin, support, and user) that have access to the WF250. Click “Save/Apply” to set the given passwords.

  • Page 53: Glossary

    WF250 802.11n Wireless ADSL Modem Router 7. Glossary ADSL asymmetric digital subscriber line. One of four DSL technologies. ADSL is designed to deliver more bandwidth downstream (from the central office to the customer site) than upstream. Downstream rates range from 1.5 to 9 Mbps, whereas upstream bandwidth ranges from 16 to 640 kbps.
  • Page 54 WF250 802.11n Wireless ADSL Modem Router to ensure the security of the private network. firmware Software set permanently or semipermanently in a device's Memory. File Transfer Protocol. Application protocol, part of the TCP/IP protocol stack, used for transferring files between network nodes.
  • Page 55 WF250 802.11n Wireless ADSL Modem Router Network Time Protocol. Protocol built on top of TCP that ensures accurate local time-keeping with reference to radio and atomic clocks located on the Internet. This protocol is capable of synchronizing distributed clocks within milliseconds over long time periods.
  • Page 56 WF250 802.11n Wireless ADSL Modem Router interoperability standard for the interface between ATM-based products (a router or an ATM switch) located in a private network and the ATM switches located within the public carrier networks. UPnP Universal Plug and Play is making home networking simple for users.

  • Page 57: Troubleshooting

    WF250 802.11n Wireless ADSL Modem Router 8. Troubleshooting If the router does not function properly, first check this session for simple troubleshooting before contacting your Internet service provider (ISP) for support. Using LEDs to Diagnose Problems The LEDs are useful aides for finding possible problem causes.
  • Page 58 WF250 802.11n Wireless ADSL Modem Router Check that you have enabled web service access. If you have configured a secured client IP address, your computer’s IP address must match it. For WAN access, you must configure remote management to allow server access from the WAN (or all).
  • Page 59 WF250 802.11n Wireless ADSL Modem Router Problems with WAN Interface Initialization of the ADSL connection failed. STEPS CORRECTIVE ACTION Check the cable connections between the ADSL port and the wall jack. The ADSL LED on the front panel of the router should be on.

  • Page 60: Technical Support

    WF250 802.11n Wireless ADSL Modem Router Declaration of Conformity CE Hereby Crypto S.A declares that the WF250 11n Wireless 150Mbps Modem Router is incompliance with the essential reguirements and other relevant provisionsof directive 1999/5/EK This equipment can be operated in the following European Countries…...

Table of Contents