Keep any loose items including ties, jewelry or long hair away from the creasing channel, to avoid injury. Children should not be allowed to operate the machine. In the event the creaser needs to repaired, turn off and unplug the machine. Contact your Formax Dealer for repair.
Page 4
SETUP Machine Data Panel Foot Pedal Switch Jack Operation Mode Changeover Switch Power Switch with Light Power Inlet with Fuse Remove the foot-control pedal from the box and attach it to the foot pedal switch on the Operation Panel. Be sure to align the pins correctly to avoid damage.
Page 5
Load paper by sliding through creasing channel under mechanism cover (Fig. 3). Fig. 3 Once the paper is aligned between the side guides, crease by using manual switch (Fig. 4) or foot pedal (Fig. 5). See Step 2 for explanation of modes. Fig.
Need help?
Do you have a question about the FD 215S and is the answer not in the manual?
Questions and answers