Termikel 14220 User Instructions page 11

4. After entering this value the clock will switch off the power and
ALARM DURATION SETTING
the alarm will beep. HAND icon will start flashing. You can silence
With this function you can get your alarm clock beep after a period
the alarm beep by pressing any button. Current time of the day, set by you.
sign and a flashing sign will appear on the display.
If you wish to restart the oven press the
oven will start working manually.
TIMER SETTING
TIMER SETTING
6. Cooking will end by bringing the oven control button to off (0)
position.
1) Select alarm setting 2) Enter time with + or – keys 3) Time will be displayed mode.
The display to be shown when the
cooking starts When the set period ends the alarm starts beeping. You can stop
the alarm by pushing any button.
ALARM VOLUME SETTING
You can select the 3-level volume of your oven by pressing the
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
button. Alarm volume is changed with every push on the key. Note:
Your digital timer is an electronic timing module that makes the
Your digital timer is an electronic timing module that makes the
By factory default, volume is set to the highest. In the event of
food in the oven ready for servicing when you want. All you need
food in the oven ready for servicing when you want. All you need
You have finished the semi automatic cooking. Your food is ready
power failure, the volume setting will be reset to the factory
to do is to program the cooking duration and the time when you
to do is to program the cooking duration and the time when you
for servicing.
default, if changed.
want your food to be ready.
want your food to be ready.
DISPLAY BRIGHTNESS SETTING
When the timer is first powered up 12.00 appears on the display.
When the timer is first powered up 12.00 appears on the display.
AUTOMATIC PROGRAMMING
You can select the 3-level display brightness setting by pressing
icon flashes. In this case the oven will not work as the contacts
icon flashes. In this case the oven will not work as the contacts
With this programme, cooking duration and the time to finish
the button. The display brightness setting will change with
of the clock relay are open.
of the clock relay are open.
cooking are programmed beforehand. Current time of the day
every push on the key.
The electricity current is transmitted to the heating elements
The electricity current is transmitted to the heating elements
must be set before starting programming.
Note: By factory default, the brightness is set to the highest. In the
through the alarm clock. Press event of power failure, the brightness setting will be reset to the
through the alarm clock. Press
Oven clock / timer works the same way as the normal clock. In the
factory default, if changed.
Oven clock / timer works the same way as the normal clock. In the
event of power failure the clock is reset. If the electricity current is IN THE EVENT OF POWER FAILURE
event of power failure the clock is reset. If the electricity current is
less than 50 Hz the clock will be slow. This is not a defect of the In the event of power failure your oven will be switched off for
less than 50 Hz the clock will be slow. This is not a defect of the
clock. In such cases set the clock again.
safety reasons. This is indicated by the flashing of the hand icon
clock. In such cases set the clock again.
Note: You don't have to set the real time of the day for manual and on the display. All current cooking programmes will be deleted.
Note: You don't have to set the real time of the day for manual and
semi automatic cooking with your oven. For full automatic Display shows 12:00 and the clock should be set. First switch on
semi automatic cooking with your oven. For full automatic
1) The time is 18:30 2) You want the food
programming you should set the real time of the day.
programming you should set the real time of the day.
THE FLASHING HAND ICON INDICATES THAT THE OVEN IS SWITCHED OFF
the oven by pressing the
to be ready at 20:45.
With the clock of your oven
With the clock of your oven
AND THAT YOU NEED TO PRESS THE
You can set the finish
1. You can set the cooking time from 0 to 10 hours.
1. You can set the cooking time from 0 to 10 hours.
time by pressing the
2. You can set the alarm time between 00:00 and 23:59 hours.
2. You can set the alarm time between 00:00 and 23:59 hours.
3. You can set the oven to full automatic, semi-automatic or
and
3. You can set the oven to full automatic, semi-automatic or
manual cooking.
manual cooking.
4. You can use it for warning purposes
4. You can use it for warning purposes
Your oven is in standby mode and the display shows
as the current time of the day and standby signs. The
ALARM DURATION SETTING
oven will not work. It starts working at 19:45 and the
With this function you can get your alarm clock beep after a period
displayed with the current time. The oven works for 1:00 hour and
set by you.
stops at 20:45. The sign appears with the end hour.
1. Prepare the food that you want to cook and put it in the oven.
Bring the oven selector switch and the thermostat button to the
position shown in the cooking table.
1) Select alarm setting 2) Enter time with + or – keys 3) Time will be displayed mode.
2. Press the button. Enter the end time of cooking by pressing
the button In 5 seconds. Let's enter the end time as 20:45.
After 1:00 hour power will be switched off and the oven stops.
When the set period ends the alarm starts beeping. You can stop
Alarm starts beeping.
the alarm by pushing any button.
While entering the time, auto
The display to be shown when the
cooking starts
appear with the time. After 5 seconds
ALARM VOLUME SETTING
You can select the 3-level volume of your oven by pressing the
"auto" appear on the display. The oven is in operation.
3. Enter the cooking time by pressing first the
button. Alarm volume is changed with every push on the key. Note:
the (-) button. The display is automatically set for 2:15 hours By factory default, volume is set to the highest. In the event of
power failure, the volume setting will be reset to the factory
cooking time. Let's say that we want to set the cooking time as
default, if changed.
1:00 hour. We can change the time as 1:00 instead of 2:15 hours
DISPLAY BRIGHTNESS SETTING
by pressing the (-) button. In 5 seconds after making the setting,
You can select the 3-level display brightness setting by pressing
the current time of the day (18:30), the word "auto" and the
the button. The display brightness setting will change with
sign appear. The oven will switch to the standby mode and it will
every push on the key.
not work.
Note: By factory default, the brightness is set to the highest. In the
4. When the oven is in standby mode, you can view the end time
event of power failure, the brightness setting will be reset to the
factory default, if changed.
of cooking by pressing the
IN THE EVENT OF POWER FAILURE
pressing the button.
In the event of power failure your oven will be switched off for
safety reasons. This is indicated by the flashing of the hand icon
on the display. All current cooking programmes will be deleted.
5. The oven starts working after 1 hour and 15 minutes, that is at
Display shows 12:00 and the clock should be set. First switch on
19:45. While the oven is in operation the 19:45 auto
THE FLASHING HAND ICON INDICATES THAT THE OVEN IS SWITCHED OFF
the oven by pressing the
displayed. The oven works for 1 hour as the entered time is 1
AND THAT YOU NEED TO PRESS THE
hour.
NORMAL POSITION.
button and then the
(eg:5 minutes) after a few seconds.
The display to be shown when the
cooking finishes
to manually operate the oven.
to manually operate the oven.
3) You can set the
button (see Clock setting).
cooking time
pressing the and
buttons. Let's
buttons.
enter the cooking time
as 1:00 hour.
icon is
button.
(eg:5 minutes) after a few seconds.
sign and the flashing
The display to be shown when the
cooking finishes
sign and the word
button and then
button and the cooking time by
button (see Clock setting).
BUTTON TO SWITCH TO THE
COOKING WITHOUT A PROGRAM (MANUAL)
NOTE: The cooking time entered should be less than the
It means that you start and finish
difference between the current time of the day and the end time
cooking
of cooking. Otherwise the oven will not switch to standby mode
programming.
and it will work until the end of cooking time.
programme in the memory you need
6. By pressing the
to reset the programme. Press the
After 5 seconds the display switches to the clock mode and the
button to reset.
SETTING THE REAL TIME OF THE DAY
SETTING THE REAL TIME OF THE DAY
current time of the day is displayed. The end of cooking time will
1. If there is a programme in the memory, it will be reset when the
Time setting can only be done when there is no active cooking
Time setting can only be done when there is no active cooking
appear on the display by pressing the
button is pressed and manual cooking will be started.
programme. Press the button. Two dots between the hour
programme. Press the
2. After putting in the oven the food that you want to cook set the
and minute start flashing; you can set the clock forward by + and
and minute start flashing; you can set the clock forward by + and
After 1:00 hour power will be switched off and the oven stops.
oven control button to the concerned position shown in the
backward by -. Longer pressing on these keys will change the
backward by -. Longer pressing on these keys will change the
Alarm starts beeping.
cooking table.
clock faster.
clock faster.
The display to be shown when the
3. Your oven works manually. Check your food with certain
cooking starts
intervals and finish cooking by switching the oven control button
to off (zero) position (since there is no programme).
Now you finished cooking. Your food is ready for servicing.
SEMI AUTOMATIC PROGRAMMING
It is the instant start of cooking and stopping after a
When the cooking programme is completed, audible warning is on and will remain
predetermined period. In this programme, you need to enter the
on for 7 minutes if not switched off before.
1) Select clock setting 2) Set the time with + or –
1) Select clock setting
cooking time. mode keys
mode
7. When the 1 hour cooking finishes, alarm starts beeping at the
preset level. Alarm can be stopped by pressing any button.
8. sign is shown.
1) The time is 18:30 2) Switch to the cooking
9. If you wish to restart the oven press the time setting mode
starts working manually.
1. Switch the oven selector switch and thermostat button to the
positions indicated on the cooking table.
2. Enter the cooking time by pressing the (+) button in 5 seconds
NOTE: If your press the
after pressing the button. You can reduce the time by the (-)
automatic programming the programmes in the memory will be
cancelled and your oven operates manually.
button. During setting
by
seconds the display is fixed showing the time.
1) The time is 18:30
10. Cooking will end by bringing the oven control button to off (0)
position.
button any time during cooking.
You have finished the semi automatic cooking. Your food is ready
for servicing.
Changing the cooking time after programming.
You can change the cooking time and the end of cooking time
COOKING WITHOUT A PROGRAM (MANUAL)
while your oven is in operation.
It means that you start and finish
cooking
programming.
programme in the memory you need
to reset the programme. Press the
button to reset.
1. If there is a programme in the memory, it will be reset when the
button is pressed and manual cooking will be started.
2. After putting in the oven the food that you want to cook set the
oven control button to the concerned position shown in the
cooking table.
sign
3. Your oven works manually. Check your food with certain
intervals and finish cooking by switching the oven control button
to off (zero) position (since there is no programme).
Now you finished cooking. Your food is ready for servicing.
SEMI AUTOMATIC PROGRAMMING
It is the instant start of cooking and stopping after a
predetermined period. In this programme, you need to enter the
cooking time.
1) The time is 18:30 2) Switch to the cooking
time setting mode
is
seconds the display is fixed showing the time.
3. As an example you can enter the desired period as 2 hours 15
minutes. Cooking starts. After 5 seconds clock setting will appear
on the display. You can view the remaining time by pressing the
button any time during cooking.
- 8 -
without making
If there is
button, the remaining time can be viewed.
button.
button. Two dots between the hour
The display to be shown when the
cooking finishes
3) Display will be fixed
2) Set the time with + or –
after 5 seconds.
keys
3) Enter the time length.
by + or - keys.
button during semi automatic and full
icon starts flashing and after 5
2) You want the food 3) You can set the
to be ready at 20:45. cooking
You can set the finish
pressing the
time by pressing the
and buttons.
enter the cooking time
as 1:00 hour.
without making
To change the end time of cooking:
If there is
The new value is entered by pressing
the button and using the (+) and (-)
keys.
To change cooking time:
The cooking time is displayed while the
button is pressed. Press the "+" or
"-" keys to set the new cooking time..
3) Enter the time length.
by + or - keys.
icon starts flashing and after 5
Ch
You
any
Yo
any
wh
3) Display will be fixed
after 5 seconds.
button. The oven
time by
and
buttons. Let's
any
any