Before Disc Playback - Panasonic CQ-C8400 Operating Instructions Manual

E

Before Disc Playback

N
G
L
I
S
CQ-C8200U/CQ-C8100U cannot play MP3/WMA fi les.
H
9
Available Discs
∫ CD-DA
(CD-TEXT is only for CQ-C8400U/CQ-C8300U.)
∫ MP3/WMA
CQ-C8400U CQ-C8300U
Caution:
≥ 3q (8 cm) CD is not available for this unit, so
do not insert it.
≥ Do not use irregularly shaped discs.
≥ Do not use discs that have a seal or label
attached.
≥ To avoid damaging the front panel, do not push
it down or place objects on it while it is open.
≥ Do not pinch your fi nger or hand in the front
panel.
≥ Do not insert foreign objects into the disc slot.
Note:
≥ The power will be turned on automatically when
a disc is loaded.
≥ A disc which has both CD-DA data and
MP3/WMA data on it may not be reproduced
normally. (For example, it may be reproduced
without sound.)
≥ Refer to the section on "Notes on MP3/WMA"
(page 36) and "Notes on Discs" (page 58).
This instructions on this page are followed for both
CD-DA playback and MP3/WMA playback.
28
CQ-C8400/8300/8200/8100U
Disc Insert
[<: eject] (OPEN)
1 Press [<: eject] (OPEN).
If there is a disc loaded,
the disc will be ejected.
Label side
2 Insert a disc.
When placing a disc into or taking a disc out from
the main unit, hold it as shown in the fi gure, and
refrain from putting any of your fi ngers into the
disc's center hole.
Note:
≥ It may take some time to start playing.
≥ Playback will start automatically after recognizing
the data of the loading disc.
CQ-C8400U
CQ-C8300U
(Example: CD-DA)
When CD is in the Player
Press [SOURCE] to select the CD (MP3/WMA)
player mode and playback starts.
Disc Eject
1 Press [<: eject].
The disc will be ejected after the front panel fully
opens.
2 Take a disc.
3 Press [<: eject] again to close.
Note:
≥ If no operation takes place within 20 seconds or
so after the panel has opened, the panel will close
automatically.
CD Player
Do not watch the scroll display while driving.
[SOURCE]
Track Selection
[9]: Next track
[:]: Beginning of the current track
For the previous track, press twice.
Fast Forward/Fast Reverse
Press and hold
[9] (5): Fast forward
[:] (6): Fast reverse
Release to resume the playback.
Pause
Press [;/1].
Press [;/1] again to cancel.
Scan Play
The fi rst 10 seconds of each track is played in
sequence.
Press [5] (SCAN).
lights.
Press [5] (SCAN) again to cancel.
Direct Track Selection
Example: track number 10
1 Press [fl].
2 Press [1] [0].
3 Press [BAND] (SET).
Note:
≥ To suspend direct selection, press [DISP]
(display) or [fl].
≥ Random, scan and repeat play are canceled once
[fl] is pressed.
[:]/[9] (6/5)
(Track selection/fast forward/fast reverse)
[DISP] (Display) [BAND] (;/1: Pause)
(SET)
CQ-C8400U CQ-C8300U
Text Display
Press and hold [DISP] (display) for more than
2 seconds in the mode display.
*Disc/track title (default)
Mode display
* Press and hold [BAND] for more than 2 seconds
to have an another circle scroll when a title is
displayed.
Note:
≥ "NO TEXT": Displays when there is no text.
[SOURCE]
POWER MENU
[0] to [9] SOURCE SEL
NUMBER VOL
(Track number)
#
MUTE
[fl]
[5] (Scan play)
1 2 3
(Number)
[6] [5]
RAND SCAN REP
(Track selection/fast
4 5 6
forward/fast reverse)
7 8 9 [DISP]
(Display)
[BAND]
0
BAND DISP
SET
(Pause) (SET)
Car Audio
CQ-C8400/8300/8200/8100U
E
N
G
L
I
S
H
10
29