Table of Contents
Advertisement
Quick Links
Model: 10-600VS
16" VS Scroll Saw
Operator's Manual
Record the serial number and date of purchase in your manual for future reference.
Serial Number: _________________________
Date of purchase: _________________________
For technical support or parts questions, email techsupport@rikontools.com or call toll free at (877)884-5167
www.rikontools.com
10-600VSM1
Advertisement
Table of Contents
Related Manuals for Rikon Power Tools 10-600VS
Summary of Contents for Rikon Power Tools 10-600VS
- Page 1 Model: 10-600VS 16” VS Scroll Saw Operator’s Manual Record the serial number and date of purchase in your manual for future reference. Serial Number: _________________________ Date of purchase: _________________________ For technical support or parts questions, email techsupport@rikontools.com or call toll free at (877)884-5167 www.rikontools.com...
-
Page 2: Safety Warnings
Operator Safety: Required Reading IMPORTANT! Safety is the single most important consideration in the operation of this equipment. The following instructions must be followed at all times. There are certain applications for which this tool was designed. We strongly recommend that this tool not be modified and/or used for any other application other than that for which it was designed. - Page 3 ALWAYS DISCONNECT TOOLS. Disconnect tools before servicing and when changing accessories such as blades, bits, and cutters. ALWAYS AVOID ACCIDENTAL STARTING. Make sure switch is in “OFF” position before plugging in cord. NEVER LEAVE TOOLS RUNNING UNATTENDED. ALWAYS CHECK FOR DAMAGED PARTS. Before initial or continual use of the tool, a guard or other part that is damaged should be checked to assure that it will operate properly and perform its intended function.
-
Page 4: Table Of Contents
Changing the Motor Belt..........................12 Trouble Shooting...............................13 Wiring Diagram..........................13 Parts List .............................14 Parts Explosion............................15 Notes .............................16 Warranty .............................17 Specifications Model No. 10-600VS Motor Amps Volts 120V, 60 Hz Electronic Variable Speed (SPM) 550 - 1,650 Cutting Capacity Blade Length Blade Length 5"... -
Page 5: Contents Of Package
Contents of Package When unpacking, check to make sure the following parts are included. If any parts are missing or broken, please call RIKON Power Tools at the number on the cover of this manual as soon as possible. Carton Contents... -
Page 6: Assembly
Assembly SCROLL SAW DESIGN FEATURES 1. Clamping screw: for removing the saw blade. 2. Blade guard: protects your hands from injury. 3. Work piece holder 4. Shavings blower: keeps the work piece area free from dust. 5. Variable speed switch 6. - Page 7 Mounting the saw on a work bench • A workbench made from solid wood is better than one made of plywood, as interfering vibrations and noise are more noticeable with plywood. • The necessary tools and small parts for assembling the saw on a workbench are not supplied with the saw.
- Page 8 B. Saw-blade with pins B-1 Saw blade removal • Extract the saw-blade by fi rst unscrewing the tight- ening screw (2). • Remove the saw-blade from the upper and lower support by slightly pressing the saw’s upper arm down (5). B-2 Inserting the saw-blade •...
-
Page 9: Electrical Requirements
Electrical Requirements The installed electric motor is completely wired ready for operation. The customer’s connection to the power supply system, and any extension cables that may be used, must conform with local regulations. Important remark: The motor is automatically switched off in the event of an overload. The motor can be switched on again after a cooling down period that can vary with environmental temperatures. -
Page 10: Maintenance
General Usage and Maintenance A scroll saw is fundamentally a “curve cutting tool” but which can also carry out straight and angled edge cuts. Familiarize yourself with the following important points prior to commissioning the saw. • The saw does not automatically cut wood. You must feed the wood against the saw blade manually. - Page 11 Warning: In the interests of operational safety, always switch off the saw and remove the cord from power supply before carrying out maintenance work. General Re-application of the wax coating on the work table makes feeding the work piece to the blade easier. Motor The power cord should be replaced immediately if pulled out, cut or damaged in any other way.
-
Page 12: Troubleshooting
Troubleshooting Service on these tools should only be performed by an authorized, qualified technician. Wiring Diagram... -
Page 13: Parts List
Parts List... -
Page 14: Parts Explosion
Parts Explosion... -
Page 15: Notes
Notes... -
Page 16: Warranty
Warranty 2-Year Limited Warranty RIKON Power Tools, Inc. (“Seller”) warrants to only the original retail consumer/purchaser of our products that each product be free from defects in materials and workmanship for a period of two (2) years from the date the product was purchased at retail. This warranty may not be transferred. - Page 17 For more information: 16 Progress Road Billerica, MA 01821 877-884-5167 / 978-528-5380 techsupport@rikontools.com www.rikontools.com Copyright RIKON Power Tools, Inc. 2009...
Need help?
Do you have a question about the 10-600VS and is the answer not in the manual?
Questions and answers