Important Safeguards - Swann SR11010 Installation And User Manual

• Do not connect your appliance
to the electricity supply until all
packing and transit protectors
have been removed.
• Leave to stand upright for at
least 4 hours before switching on
to allow compressor oil to settle
• This fridge/freezer must only be
used for its intended purpose i.e
the storing and freezing of edible
foodstuff.
• Do not dispose of the appliance
on a fire. Your appliance
contains non CFC/HFC natural
substances in the cooling system
and in the insulation, which are
potentially flammable if exposed
to fire. Therefore, take care not
to damage, the cooling circuit
or pipes of the appliance in
transportation and in use. In
case of damage do not expose
the appliance to fire or potential
ignition source and immediately
ventilate the room where the
appliance is situated.
• We suggest you contact your
local authority for disposal
SR11010.indd 2

Important Safeguards

2 2
information and facilities available.
• See installation section for
information on suitable location.
• On delivery, check to make
sure that the product is not
damaged and that all the parts
and accessories are in perfect
condition.
• Ensure that the plug remains
readily accessible. Do not use
multiple adaptor or extension
cables
.
• Failure to observe these
instructions may invalidate your
right to free service during the
guarantee period.
• Keep ventilation openings, in the
appliance enclosure or in the built-
in structure, clear of obstruction.
WARNING: Keep ventilation
openings, in the appliance
enclosure or in the built-in
structure, clear of obstruction.
WARNING: Do not use
mechanical devices or other
21/07/2014 10:42