Pepco Web-Programmable Thermostat Homeowner's Manual page 13

While in any schedule programming screen:
• Pressing HOME will exit without saving changes
• Pressing NEXT will advance to the next day(s) to be programmed
• Pressing DONE will save any changes and return to the previous menu
5. The Morning Starts At time is highlighted. Press
Morning time period to the desired start time. Press
Morning Cool To or Heat To.
6. The Morning Heat To or Cool To (depending on which mode is being
programmed) is highlighted. Press
setpoint to the desired temperature. Press
Starts At time.
7. Repeat Steps 5–6 for the Day, Evening, and Night Starts At and
Heat To or Cool To setpoints.
8. To change to the next day or group of days (Weekdays or Weekends),
press NEXT. Then repeat steps 5 through 8 as needed.
9. When changes are complete, press DONE.
10. Press HOME after programming is complete and changes have
been saved.
PROGRAMMING TIPS:
• If you don't want to program a particular day, you can skip it. Press NEXT one or more times until you reach the
desired day.
• If you want to similarly program days in a group with only slight differences, program as a group first, then
program individual days as needed. The individual day program overrides the group program.
Pepco Web-Programmable Thermostat Homeowner's Manual
or to adjust the
to highlight the
or to adjust the Morning
to highlight the Day
13