Tattletale User Manual page 28

Learn Mode:
System is ready to enroll sensor or remote. User must follow sensor specific instructions to activate.
Log:
Record of the last 500 events in the system.
Lost:
Sensor has been taken out of range and is no longer communicating with the base unit.
Low Battery:
Sensor battery needs replaced.
Name System:
User can set customized name for system.
Nightlight:
Used to operate tattletale's strobe light as a nightlight.
Open Sensor:
Sensor is tripped and will need to be closed or bypassed to arm system.
Pet Mode:
The perimeter sensors are hot and all interior sensors are disabled with at least one door delay to allow
for re-entry without tripping tattletale.
Perimeter Sensors:
Sensors located on the perimeter of the home, typically doors and windows.
Perimeter Instant:
Perimeter sensors that do not have a delay time, when tripped an instant alarm will occur.
Perimeter Delay:
Perimeter sensors that will go into delay time when tripped.
PIN:
Four digit personal code used for operating system.
Quiet:
Silences keypad volume and reduces chime volume by half.
Rattlesnake:
tattletale's anti tamper sensor that will trigger an instant alarm when tattletale is disturbed.
Reset to Factory:
Call tattletale technicians if factory reset is required 1.888.TELL.ON.U.
28 | P a g e